Skip to content
farmsorted

Add each silo filled at harvest as its own batch

At harvest the silo tally lives in the header driver’s head and a notebook on the dash. Two weeks later nobody is sure which silo has the good barley off 9, and the marketer is selling tonnes that are really in a different bin.

The Grain storage keeper adds the fill as a harvest batch kept at that silo, with the paddocks, tonnes and moisture and says how much room is left in the silos still empty.

When · On demand
“Filled Silo 4 with the barley off 9 and 12, about 140 t, header reading 11.6”
You get
A harvest batch for Silo 4 with paddocks, tonnes and moisture; room left in the other silos; a storage check set if it’s held
Approval level
Act and tell. Does it and logs it. You hear about it after. You can change it.
Useful for
CroppingMixed

What it reads

  • The text from the header or chaser bin
  • Inventory: Barley [variety], batches by where they’re kept
  • What each silo holds, from its pressure test and last harvest
  • Grade notes from the harvest coordinator

What you get

  • A harvest batch: Barley [variety], kept at Silo 4, about 140 t, paddocks 9 and 12, 11.6% moisture, dated today
  • How close Silo 4 is to full, and the room left in Silos 5 and 6
  • An insect and temperature check set for Silo 4 if it’s held
  • The day’s harvest by silo in the report for the grain marketer

When it stops and asks you

  • The tonnes are a guess and the truck dockets say otherwise
  • Grain of two grades went into the same silo
  • A silo failed its last pressure test
  • The silo still had last season’s grain in it

How often

Every silo or bag filled at harvest

Who uses it

OwnersManagersFarm staff

What it uses

Live

SMS and voice notes

Text the team, send a voice note or a photo, or forward a message. There’s no new app to learn.

Nothing official leaves the farm without your yes.This job runs at Act and tell: does it and logs it. You hear about it after. You can change that any time.

See the guardrails

The conversation

How the job plays out, step by step.

Grain storage keeper

Started 7:12am · On demand

Start to done
3 min
Agent actions
6
Needed you
2×
[AGENT NAME]For the Grain storage keeper

Filled Silo 4 with the barley off 9 and 12, about 140 t, header reading 11.6.

Staff · 7:12am

Grain storage keeper

Checked Silo 4 and the barley already in the inventory

Grain storage keeper

Added the fill as a harvest batch

Silo 4’s in the inventory: 140 t of [variety] off 9 and 12 at 11.6%, about 10 t off full. Silos 5 and 6 are empty, about 300 t of room between them. Where’s the barley off 4 going? It might come in feed grade.

[AGENT NAME] · 7:12am

Keep 4 separate. Put it in 6.

You · 7:14am

Grain storage keeper

Noted where Paddock 4 goes and set the storage check

Done · 7:15am4 saved

  • A harvest batch: Barley [variety], kept at Silo 4, about 140 t, paddocks 9 and 12, 11.6% moisture, dated todaySaved
  • How close Silo 4 is to full, and the room left in Silos 5 and 6Saved
  • An insect and temperature check set for Silo 4 if it’s heldSaved
  • The day’s harvest by silo in the report for the grain marketerSaved

Behind the scenes

  1. 7:12am

    Staff asks

    “Filled Silo 4 with the barley off 9 and 12, about 140 t, header reading 11.6.”

  2. 7:12am+13 sec

    Grain storage keeper works on it · 3 steps

    Checked Silo 4 and the barley already in the inventory

    • inventory.readBarley [variety], 210 t kept at Silo 2; nothing at Silo 4
    • records.searchSilo 4 passed its pressure test [date], holds about 150 t of barley
    • Harvest coordinator notes: 9 and 12 sampled [grade]
  3. 7:12am+7 sec

    Grain storage keeper works on it · 1 step

    Added the fill as a harvest batch

    • inventory.updateAdd a harvest, Barley [variety], 140 t, kept at Silo 4, batch H4-[date], paddocks 9 and 12, 11.6% moisture
  4. 7:12am+2 sec

    [AGENT NAME] messages you

    “Silo 4’s in the inventory: 140 t of [variety] off 9 and 12 at 11.6%, about 10 t off full. Silos 5 and 6 are empty, about 300 t of room between them. Where’s the barley off 4 going? It might come in feed grade.”

  5. 7:14am+3 min

    You reply

    “Keep 4 separate. Put it in 6.”

  6. 7:15am+10 sec

    Grain storage keeper works on it · 2 steps

    Noted where Paddock 4 goes and set the storage check

    • memory.rememberPaddock 4 barley to Silo 6, kept apart from 9 and 12
    • reminders.createinsect and temperature check on Silo 4 in 3 weeks if still held
  7. 7:15am+3 sec

    Grain storage keeper Done

    Silo 4’s batch on the inventory with paddocks, tonnes and moisture; 300 t of room in 5 and 6, with Paddock 4 going to 6; storage check set for Silo 4

    • reports.draftharvest by silo, day 6, for the grain marketer

An example with made-up data. Names and figures in [brackets] are placeholders.

The agent behind it

Grain storage keeperCropping

The Grain storage keeper knows what’s in every silo and bag: grain, grade, tonnes, fumigation and quality.

What it won’t do

  • Say grain is safe to outload before the fumigation period ends
  • Make up a tonnage or grade
  • Recommend a fumigant: follow the label and your adviser

More jobs the Grain storage keeper does.

The farm software this job works from

Put [AGENT NAME] to work on your farm.

We’re taking a small number of pilot farms in Australia. Start with one or two agents and add more as you go.

Pilot farms wanted

Want to try it out?

Join the pilot, or book a demo and we’ll walk you through this job on a farm like yours. You text the team from your phone. Some connections are still being built, and we’ll tell you which.

  • SMS and voice notes
  • Nothing to install

Free report

Getting started with AI.

A free practical guide for Australian farms and agribusinesses

Where AI actually helps on a farm, what it needs from you, the risks to watch, and a 90-day plan to start small.

  • Where it actually helps
  • What it needs from you
  • Risks and guardrails
  • Working out the return
Book a demoJoin the pilot