Skip to content
Agentic Ag
On demandAct with approvalThe everyday

Compare this year’s soil tests with the old lab’s

A new lab can report pH in calcium chloride instead of water, or phosphorus by a different test, and every paddock looks like it went backwards overnight. Lime and fertiliser get ordered on a change that isn’t real.

The Soil health tracker reads both labs’ sheets in Documents, matches each result by the method printed beside it, compares only the ones done the same way and says plainly which changes it can’t call.

When · On demand
“New soil tests are back from [new lab]. We used [old lab] before. Has anything moved?”
You get
Results that can be compared, paddock by paddock; the ones that can’t, and why; the paddocks that really moved; a job for paired samples next round
Approval level
Act with approval. Prepares it fully. You tap yes. You can change it.
Useful for
CroppingMixedOrchards and vines

What it reads

  • Documents: [new lab] results for 12 paddocks, [year]
  • Documents: [old lab] results for the same paddocks, last two tests
  • The method printed beside each result on both sheets
  • Lime and fertiliser records since the last test

What you get

  • A table of the results done the same way at both labs, with the change
  • A list of results that can’t be compared, with the method each lab used
  • The paddocks where a like-for-like result has really moved
  • A job for [agronomist] to get paired samples next round

When it stops and asks you

  • A sheet doesn’t print the method beside a result
  • Sampling depth or time of year differs between the two
  • A paddock was sampled in different spots

How often

Whenever the farm changes soil labs, and the season after

Who uses it

OwnersManagersAdvisors and consultants

What it uses

Live

Photos, PDFs and spreadsheets

Send in scale exports, scan results, soil tests, old spreadsheets or a photo of the shed whiteboard, and they become records.

Live

Inbound email

Forward invoices, kill sheets, NVDs, soil tests and emails from your stock agent to your own farm address. The team reads each one, sums it up and suggests who handles it.

Exploring

Soil test labs

If we get access, soil results would go straight from the lab into each paddock’s record.

The last 2 make it better, but it works without them.

Nothing official leaves the farm without your yes.This job runs at Act with approval: prepares it fully. You tap yes. You can change that any time.

See the guardrails

The conversation

How the job plays out, step by step.

Soil health tracker

Started 7:12am · On demand

Start to done
3 min
Agent actions
9
Needed you
2×
[AGENT NAME]For the Soil health tracker

New soil tests are back from [new lab]. We used [old lab] before. Has anything moved?

You · 7:12am

Soil health tracker

Read both labs’ sheets and matched each result by its method

Two things changed at once: the year and the method. [old lab] did pH in water and [new lab] did it in calcium chloride, which reads lower, so these can’t tell you if pH moved. Colwell P and organic carbon were done the same way at both, so those I can compare.

[AGENT NAME] · 7:12am

Soil health tracker

Compared the like-for-like results

Like for like: phosphorus is down in 3 paddocks, most in Paddock 6, which hasn’t had any since [year]. Organic carbon is steady everywhere. For pH, [agronomist] could have [new lab] run a few samples in water as well, so we can line the two up.

[AGENT NAME] · 7:12am

Want a job on the list for [agronomist] to sort paired pH samples next round? I’ll save this comparison to Documents too.

[AGENT NAME] · 7:12am

Approved

Yep.

You · 7:15am

Soil health tracker

Saved the comparison and added the job

Done · 7:15am4 saved

  • A table of the results done the same way at both labs, with the changeSaved
  • A list of results that can’t be compared, with the method each lab usedSaved
  • The paddocks where a like-for-like result has really movedSaved
  • A job for [agronomist] to get paired samples next roundSaved

Behind the scenes

  1. 7:12am

    You ask

    “New soil tests are back from [new lab]. We used [old lab] before. Has anything moved?”

  2. 7:12am+16 sec

    Soil health tracker works on it · 4 steps

    Read both labs’ sheets and matched each result by its method

    • documents.read[new lab] report, 12 paddocks, pages 1 to 6
    • documents.read[old lab] reports, [year] and [year]
    • pH: old lab in water, new lab in calcium chloride
    • Colwell P and organic carbon: same method at both
  3. 7:12am+2 sec

    [AGENT NAME] messages you

    “Two things changed at once: the year and the method. [old lab] did pH in water and [new lab] did it in calcium chloride, which reads lower, so these can’t tell you if pH moved. Colwell P and organic carbon were done the same way at both, so those I can compare.”

  4. 7:12am+10 sec

    Soil health tracker works on it · 2 steps

    Compared the like-for-like results

    • Colwell P down in 3 paddocks, most in Paddock 6: [old] to [new] mg/kg, no phosphorus on it since [year]
    • Organic carbon steady across all 12
  5. 7:12am+2 sec

    [AGENT NAME] messages you

    “Like for like: phosphorus is down in 3 paddocks, most in Paddock 6, which hasn’t had any since [year]. Organic carbon is steady everywhere. For pH, [agronomist] could have [new lab] run a few samples in water as well, so we can line the two up.”

  6. 7:12am+2 sec

    [AGENT NAME] asks for your yes

    “Want a job on the list for [agronomist] to sort paired pH samples next round? I’ll save this comparison to Documents too.”

  7. 7:15am+3 min

    You approve

    “Yep.”

  8. 7:15am+13 sec

    Soil health tracker works on it · 3 steps

    Saved the comparison and added the job

    • reports.draftSoil tests, [old lab] and [new lab], compared by method
    • jobs.createPaired pH samples, water and calcium chloride, next sampling, [agronomist]
    • memory.rememberChanged soil labs in [year]; pH method changed
  9. 7:15am+3 sec

    Soil health tracker Done

    Comparison in Documents with the pH results marked as not comparable; Paddock 6 phosphorus flagged for [agronomist]; paired samples on the job list

An example with made-up data. Names and figures in [brackets] are placeholders.

The agent behind it

Soil health trackerLand & environment

The Soil health tracker keeps every soil test in one place and shows how pH, nutrients and organic carbon are moving paddock by paddock.

What it won’t do

  • Set lime, gypsum or fertiliser rates: that’s your agronomist’s call
  • Read a result it can’t see on the test sheet
  • Compare tests from different labs as if they were the same method

More jobs the Soil health tracker does.

Put [AGENT NAME] to work on your farm.

We’re taking a small number of pilot farms in [REGION]. Start with one or two agents and add more as you go.

Pilot farms wanted

Want to try it out?

Join the pilot, or book a demo and we’ll walk you through this job on a farm like yours. You text the team from your phone. Some connections are still being built, and we’ll tell you which.

  • Photos, PDFs and spreadsheets
  • Inbound email
  • Soil test labs
  • Nothing to install

Free report

Getting started with AI.

A free practical guide for Australian farms and agribusinesses

Where AI actually helps on a farm, what it needs from you, the risks to watch, and a 90-day plan to start small.

  • Where it actually helps
  • What it needs from you
  • Risks and guardrails
  • Working out the return
Book a demoJoin the pilot