Skip to content
Agentic Ag

Work out what each megalitre cost to pump

Pumping is one of the biggest costs on an irrigation farm, but nobody knows the per-megalitre figure until the end of the year, and running in peak hours can add a lot to it.

The Fuel and power watcher divides the pump’s power or diesel cost for the season by the megalitres through the meter and shows how much was pumped in peak and off-peak hours.

When · On demand
“What’s it costing us per meg to pump off the river this season?”
You get
Cost per ML by pump; peak against off-peak share; comparison with last season
Approval level
Inform. Tells you what’s happening. Does nothing. You can change it.
Useful for
Irrigated cropsDairyOrchards and vines

What it reads

  • Power bills or diesel fills for each pump site
  • Water meter readings for the season
  • Tariff times on the power bill
  • Last season’s figures

What you get

  • Cost per ML for each pump this season
  • How much was pumped in peak and off-peak times
  • Last season’s cost per ML for comparison

When it stops and asks you

  • A meter reading is missing for part of the season
  • A pump site shares a power meter with a house or shed
  • Diesel for the pump isn’t logged separately

How often

On demand, mostly during and after the irrigation season

Who uses it

OwnersManagers

On other farms

  • Dairy: The pivot and the shed often share a supply, so the shed load is taken out first.

What it uses

Live

Photos, PDFs and spreadsheets

Send in scale exports, scan results, soil tests, old spreadsheets or a photo of the shed whiteboard, and they become records.

Partner

Wattwatchers

Power use on pumps and sheds would come in, so a pump that stops shows up as a job.

Exploring

WaterNSW and WaterQLD

If we get access, the team would see water licence balances and usage, so it knows what’s left to pump.

Coming

Xero

Once it’s connected, bills are drafted and coded to the right part of the farm, and sales and costs are ready for the bank and your accountant.

The last 3 make it better, but it works without them.

Nothing official leaves the farm without your yes.This job runs at Inform: tells you what’s happening. Does nothing. You can change that any time.

See the guardrails

The conversation

How the job plays out, step by step.

Fuel and power watcher

Started 7:12am · On demand

Start to done
3 min
Agent actions
4
Needed you
2×
[AGENT NAME]For the Fuel and power watcher

What’s it costing us per meg to pump off the river this season?

You · 7:12am

Fuel and power watcher

Pulled the river pump’s power bills and meter readings since October

River pump: 412 ML since October for [amount] in power, so about [amount] per ML. Last season was [amount]. 38% of this season’s pumping was in peak hours, against 20% last year.

[AGENT NAME] · 7:12am

That’s the heat in December, we ran it flat out. What would it have been off-peak?

You · 7:14am

Fuel and power watcher

Worked out the same volume at the off-peak rate on the bill

Done · 7:14am3 saved

  • Cost per ML for each pump this seasonSaved
  • How much was pumped in peak and off-peak timesSaved
  • Last season’s cost per ML for comparisonSaved

Behind the scenes

  1. 7:12am

    You ask

    “What’s it costing us per meg to pump off the river this season?”

  2. 7:12am+13 sec

    Fuel and power watcher works on it · 3 steps

    Pulled the river pump’s power bills and meter readings since October

    • documents.read3 power bills, river pump NMI
    • records.searchmeter readings, 412 ML pumped
    • xero.readexport on file, bills total [amount]
  3. 7:12am+2 sec

    [AGENT NAME] messages you

    “River pump: 412 ML since October for [amount] in power, so about [amount] per ML. Last season was [amount]. 38% of this season’s pumping was in peak hours, against 20% last year.”

  4. 7:14am+3 min

    You reply

    “That’s the heat in December, we ran it flat out. What would it have been off-peak?”

  5. 7:14am+7 sec

    Fuel and power watcher works on it · 1 step

    Worked out the same volume at the off-peak rate on the bill

    • Peak share repriced at the off-peak tariff on the bill
  6. 7:14am+3 sec

    Fuel and power watcher Done

    Cost per ML by month shown with the peak share; about [amount] would have been saved at off-peak; figures ready for the season review

An example with made-up data. Names and figures in [brackets] are placeholders.

The agent behind it

Fuel and power watcherOperations

The Fuel and power watcher keeps an eye on diesel, electricity and solar: what you use, what it costs and where it goes.

What it won’t do

  • Lodge the fuel tax credit or a BAS
  • Switch energy plans or retailers
  • Guess fuel use when dockets are missing

More jobs the Fuel and power watcher does.

Put [AGENT NAME] to work on your farm.

We’re taking a small number of pilot farms in [REGION]. Start with one or two agents and add more as you go.

Pilot farms wanted

Want to try it out?

Join the pilot, or book a demo and we’ll walk you through this job on a farm like yours. You text the team from your phone. Some connections are still being built, and we’ll tell you which.

  • Photos, PDFs and spreadsheets
  • Wattwatchers
  • WaterNSW and WaterQLD
  • Nothing to install

Free report

Getting started with AI.

A free practical guide for Australian farms and agribusinesses

Where AI actually helps on a farm, what it needs from you, the risks to watch, and a 90-day plan to start small.

  • Where it actually helps
  • What it needs from you
  • Risks and guardrails
  • Working out the return
Book a demoJoin the pilot