Line up a frost damage check the morning after
After a frost night, everyone wants to know how bad it is, but the damage takes cutting buds to see. Without a quick count by block, the crop load estimate, thinning plan and insurance claim are guesses.
The Chill and frost tracker lists the blocks that went below critical and for how long, sets which to check first and asks for bud or blossom cuts and photos to record the damage.
- When · Daily
- The overnight logger readings you send show a block fell below the critical temperature for its growth stage
- You get
- Blocks below critical with time and lowest reading; check order; damage percentages logged by block; passed to the crop load forecaster
- Approval level
- Act with approval. Prepares it fully. You tap yes. You can change it.
- Useful for
- Orchards and vines
What it reads
- Overnight logger readings you send, by block
- Growth stage by block
- Critical temperatures for each stage
- Frost fan run log
What you get
- Blocks that went below critical, how low and for how long
- An order for checking blocks
- Damage percentages logged by block from the bud cuts
- A handover to the crop load forecaster
When it stops and asks you
- A sensor dropped out overnight
- The growth stage on a block is out of date
- Bud cuts show damage on a block that stayed above critical
How often
After each frost night in spring
Who uses it
OwnersManagersFarm staff
What it uses
SMS and voice notes
Text the team, send a voice note or a photo, or forward a message. There’s no new app to learn.
Nothing official leaves the farm without your yes.This job runs at Act with approval: prepares it fully. You tap yes. You can change that any time.
The conversation
How the job plays out, step by step.
2 agents on it
Started 5:40am · Daily
- Start to done
- 8 min
- Agent actions
- 4
- Needed you
- 2×
[AGENT NAME]For the Chill and frost trackerDaily check · 5:40am
The logger readings you sent show Blocks 3, 5 and 8 went below critical overnight
Chill and frost tracker
Checked fan runs and growth stages to set the check order

Block 8 got to minus 2.6 for 2.5 hours at full bloom with no fans. Blocks 3 and 5 got to about minus 1.4 with fans running. Check Block 8 first. Cut 50 king flowers across a few rows and count the brown centres. Photos help.
[AGENT NAME] · 5:40am
Block 8: 31 of 50 brown. Block 3: 6 of 50. Block 5: 9 of 50.
Staff · 5:45am

Block 8 is 62%, Block 3 12%, Block 5 18%. Log the damage by block and pass it to the Crop load forecaster?
[AGENT NAME] · 5:45am
Yep.
You · 5:47am
Chill and frost tracker
Logged damage by block

Chill and frost tracker → Crop load forecaster
Frost [date]: king flower damage Block 8 62%, Block 3 12%, Block 5 18%
Done · 5:48am4 saved
- Blocks that went below critical, how low and for how longSaved
- An order for checking blocksSaved
- Damage percentages logged by block from the bud cutsSaved
- A handover to the crop load forecasterSaved
Behind the scenes
5:40am
Trigger Daily check
The logger readings you sent show Blocks 3, 5 and 8 went below critical overnight
records.searchlogger readings you sent- Block 8 lowest at minus 2.6 °C for 2.5 hours
5:40am+10 sec
Chill and frost tracker works on it · 2 steps
Checked fan runs and growth stages to set the check order
- Fans ran on Blocks 3 to 6, not Block 8
- Block 8 at full bloom, Blocks 3 and 5 at petal fall
5:40am+2 sec
[AGENT NAME] messages you
“Block 8 got to minus 2.6 for 2.5 hours at full bloom with no fans. Blocks 3 and 5 got to about minus 1.4 with fans running. Check Block 8 first. Cut 50 king flowers across a few rows and count the brown centres. Photos help.”
5:45am+5 min
Staff replies
“Block 8: 31 of 50 brown. Block 3: 6 of 50. Block 5: 9 of 50.”
5:45am+2 sec
[AGENT NAME] asks for your yes
“Block 8 is 62%, Block 3 12%, Block 5 18%. Log the damage by block and pass it to the Crop load forecaster?”
5:47am+3 min
You approve
“Yep.”
5:47am+7 sec
Chill and frost tracker works on it · 1 step
Logged damage by block
records.createfrost damage [date], Block 8 62%, Block 3 12%, Block 5 18%
5:47am+6 sec
→ Crop load forecaster picks it up
Frost [date]: king flower damage Block 8 62%, Block 3 12%, Block 5 18%
5:48am+3 sec
Chill and frost tracker Done
Frost damage logged by block with readings and counts; crop load forecaster has the figures; Block 8 noted as unprotected
memory.rememberBlock 8 no fan cover
An example with made-up data. Names and figures in [brackets] are placeholders.
The agent behind it
The Chill and frost tracker counts chill portions through winter and watches frost risk in spring.
What it won’t do
- Start frost fans or sprinklers
- Promise a frost won’t come
- Make up a temperature reading
More jobs the Chill and frost tracker does.
- Get a frost heads-up for the blocks at risk tonightDaily
- Log a frost fan run from a textOn demand
- A fortnightly chill tally against each variety’s needScheduled
- Check the frost fans have fuel before a run of cold nightsDaily
- Pull together the frost record for an insurance claimOn demand
- Get the frost alarms right on every block before floweringScheduled
Put [AGENT NAME] to work on your farm.
We’re taking a small number of pilot farms in Australia. Start with one or two agents and add more as you go.
See it on a farm like yours.
30 minutes with Thomas, our founder, on records like your own.
Livestock, paddocks, visitors and tanks, in one place.
The farm management software comes with every plan. Keep the software you already use, or use ours.
Not ready yet? Start with a free calculator.
The sums you do every week, for stock, pasture, crops and the books. No sign-up.
Watch a job before you commit.
Pick a playbook and see it play out, step by step.

