Get the header going again when it breaks down mid-harvest
Every hour the header stands still in harvest is an hour of crop at risk from weather. A lot of the delay is finding the part number, ringing round for the part and the mechanic, and telling the crew, all while you’re standing in the paddock.
The Machinery keeper logs the fault with the hours, pulls the part numbers and repair history for that part, gets the mechanic and parts lined up through the Contractor coordinator and tells the Operations lead so tomorrow’s plan changes.
- When · On demand
- “Header’s down. Bearing’s gone on the rotor, smoke everywhere.”
- You get
- Fault logged with hours and photos; part numbers and history for that bearing; mechanic and parts lined up; crew plan changed
- Approval level
- Act and tell. Does it and logs it. You hear about it after. You can change it.
- Useful for
- CroppingIrrigated crops
What it reads
- The fault you report and any photos
- Machine hours and service history
- Past repairs on the same part
- Mechanics and dealers you’ve used
What you get
- The fault logged with the hours
- The part history: when that bearing was last replaced
- Mechanic and parts lined up
- The crew plan changed for the rest of the day
When it stops and asks you
- There’s smoke or heat, so fire comes first
- Nobody knows yet which bearing it is
- A contract header might be cheaper than waiting for parts
How often
When a header breaks down; a few times a harvest
Who uses it
OwnersManagersFarm staff
What it uses
SMS and voice notes
Text the team, send a voice note or a photo, or forward a message. There’s no new app to learn.
John Deere Operations Center
If we get access, machine records for sowing, spraying and harvest would be filed against the right paddock.
The last one makes it better, but it works without it.
Nothing official leaves the farm without your yes.This job runs at Act and tell: does it and logs it. You hear about it after. You can change that any time.
The conversation
How the job plays out, step by step.
3 agents on it
Started 7:12am · On demand
- Start to done
- 5 min
- Agent actions
- 4
- Needed you
- 3×
[AGENT NAME]For the Machinery keeperHeader’s down. Bearing’s gone on the rotor, smoke everywhere.
You · 7:12am

Fire first: is the smoke out, and is the extinguisher on the header still full? I’ll log it at today’s hours.
[AGENT NAME] · 7:12am
It’s out, used the knapsack. Used one extinguisher.
You · 7:14am

Machinery keeper
Logged the fault and pulled the history for that bearing

Logged at 3,312 hours. The rear rotor bearing was last done at 2,600 hours, part [number]. I’m lining up [mechanic] and the part for today, and moving the crew onto the chaser bin service.
[AGENT NAME] · 7:14am
Good. Get [dealer] to send the bearing out today if they can.
You · 7:17am


Machinery keeper → Contractor coordinator
Asked the Contractor coordinator to book [mechanic] for today and get the bearing from [dealer]


Machinery keeper → Operations lead
Told the Operations lead the header is down so the crew plan can change
Done · 7:17am4 saved
- The fault logged with the hoursSaved
- The part history: when that bearing was last replacedSaved
- Mechanic and parts lined upSaved
- The crew plan changed for the rest of the daySaved
Behind the scenes
7:12am
You ask
“Header’s down. Bearing’s gone on the rotor, smoke everywhere.”
7:12am+2 sec
[AGENT NAME] messages you
“Fire first: is the smoke out, and is the extinguisher on the header still full? I’ll log it at today’s hours.”
7:14am+3 min
You reply
“It’s out, used the knapsack. Used one extinguisher.”
7:14am+10 sec
Machinery keeper works on it · 2 steps
Logged the fault and pulled the history for that bearing
records.log_servicerotor bearing failure at 3,312 hours, extinguisher used- Rotor rear bearing last replaced at 2,600 hours, part [number]
7:14am+2 sec
[AGENT NAME] messages you
“Logged at 3,312 hours. The rear rotor bearing was last done at 2,600 hours, part [number]. I’m lining up [mechanic] and the part for today, and moving the crew onto the chaser bin service.”
7:17am+3 min
You reply
“Good. Get [dealer] to send the bearing out today if they can.”
7:17am+6 sec
→ Contractor coordinator picks it up
Asked the Contractor coordinator to book [mechanic] for today and get the bearing from [dealer]
7:17am+6 sec
→ Operations lead picks it up
Told the Operations lead the header is down so the crew plan can change
7:17am+3 sec
Machinery keeper Done
Fault logged with hours; mechanic and part being lined up; crew plan changed; extinguisher refill added to the jobs; mechanic to say when it’s safe to run again
jobs.createrefill header extinguisherreminders.createcheck rotor bearings at the next 250-hour service
An example with made-up data. Names and figures in [brackets] are placeholders.
The agent behind it
Machinery keeperOperationsThe Machinery keeper tracks service schedules, registrations and repairs for everything with an engine.
What it won’t do
- Book a mechanic without your approval
- Tell you a machine is safe to use after a fault; that’s for whoever fixes it
More jobs the Machinery keeper does.
The farm software this job works from
Put [AGENT NAME] to work on your farm.
We’re taking a small number of pilot farms in [REGION]. Start with one or two agents and add more as you go.
See it on a farm like yours.
30 minutes with Thomas, our founder, on records like your own.
Livestock, paddocks, visitors and tanks, in one place.
The farm management software comes with every plan. Keep the software you already use, or use ours.
Not ready yet? Start with a free calculator.
The sums you do every week, for stock, pasture, crops and the books. No sign-up.
Watch a job before you commit.
Pick a playbook and see it play out, step by step.
