Skip to content
farmsorted
On demandAct with approvalThe everyday

Log the aerial defoliation by field from the pilot’s sheet

The aerial operator’s sheet sits in the ute until the myBMP audit, and by then nobody can say which field got the second pass or what the wind was doing. If a neighbour says the defoliant drifted, that sheet is the record you’re judged on.

The Cotton crop monitor reads the pilot’s job sheet, checks the hectares against the map and logs the defoliation on each field with product, rate, time and weather in the farm’s own myBMP fields, once you’ve checked it.

When · On demand
“Here’s [aerial operator]’s sheet for the defol on 6, 7 and 9” with the job sheet attached
You get
A spray record on each field with your myBMP fields filled; anything the sheet left out listed; the sheet kept in Documents with the records
Approval level
Act with approval. Prepares it fully. You tap yes. You can change it.
Useful for
Irrigated crops

What it reads

  • The pilot’s job sheet: fields, products, rates, water rate, start and finish, wind, Delta T
  • Fields 6, 7 and 9 on the map with their areas
  • The farm’s own fields on spray records: wind speed, wind direction, Delta T, applicator
  • Inventory: whether the products came from the farm’s shed

What you get

  • Spray records on 6, 7 and 9 with every field filled from the sheet
  • The sheet’s hectares checked against the map
  • What the sheet left out, so you can get it from the operator
  • The sheet saved in Documents with the records pointing to it

When it stops and asks you

  • The sheet’s hectares differ from the map
  • The product came in the pilot’s tank rather than from the farm’s shed
  • Wind or Delta T is blank for a field

How often

Each aerial or ground defoliation pass

Who uses it

ManagersThe farm office

What it uses

Live

SMS and voice notes

Text the team, send a voice note or a photo, or forward a message. There’s no new app to learn.

The last one makes it better, but it works without it.

Nothing official leaves the farm without your yes.This job runs at Act with approval: prepares it fully. You tap yes. You can change that any time.

See the guardrails

The conversation

How the job plays out, step by step.

Cotton crop monitor

Started 7:12am · On demand

Start to done
6 min
Agent actions
6
Needed you
3×
[AGENT NAME]For the Cotton crop monitor

Here’s [aerial operator]’s sheet for the defol on 6, 7 and 9.

You · 7:12am

Cotton crop monitor

Read the sheet and checked it against the fields

Sheet’s clear for 6 and 7. Two things on 9: no wind written in, and it says 190 ha where the map has 205. Did they leave the strip along the channel?

[AGENT NAME] · 7:12am

Yeah, they left the channel bank for the ground rig. Wind was the same all morning, but ask him if you want.

You · 7:14am

I’ll log 9 as 190 ha and mark its wind as not recorded with a note to get it from [aerial operator], rather than guess. The products came in the pilot’s tank, so nothing comes out of our shed. Save the three records?

[AGENT NAME] · 7:14am

Approved

Yes, save them.

You · 7:17am

Cotton crop monitor

Logged the defoliation on each field

Done · 7:17am4 saved

  • Spray records on 6, 7 and 9 with every field filled from the sheetSaved
  • The sheet’s hectares checked against the mapSaved
  • What the sheet left out, so you can get it from the operatorSaved
  • The sheet saved in Documents with the records pointing to itSaved

Behind the scenes

  1. 7:12am

    You ask

    “Here’s [aerial operator]’s sheet for the defol on 6, 7 and 9.”

  2. 7:12am+13 sec

    Cotton crop monitor works on it · 3 steps

    Read the sheet and checked it against the fields

    • pdf.extract3 fields, [product] at [rate] with [product] at [rate], [water rate], [date] 6:10 to 8:40 am
    • Wind 8 to 12 km/h SE, Delta T 4 to 6; Field 9 wind left blank
    • records.searchField 6 186 ha, Field 7 142 ha, Field 9 205 ha on the map; sheet has 9 at 190 ha
  3. 7:12am+2 sec

    [AGENT NAME] messages you

    “Sheet’s clear for 6 and 7. Two things on 9: no wind written in, and it says 190 ha where the map has 205. Did they leave the strip along the channel?”

  4. 7:14am+3 min

    You reply

    “Yeah, they left the channel bank for the ground rig. Wind was the same all morning, but ask him if you want.”

  5. 7:14am+2 sec

    [AGENT NAME] asks for your yes

    “I’ll log 9 as 190 ha and mark its wind as not recorded with a note to get it from [aerial operator], rather than guess. The products came in the pilot’s tank, so nothing comes out of our shed. Save the three records?”

  6. 7:17am+3 min

    You approve

    “Yes, save them.”

  7. 7:17am+13 sec

    Cotton crop monitor works on it · 3 steps

    Logged the defoliation on each field

    • records.log_applicationField 6 186 ha, Field 7 142 ha, Field 9 190 ha with the channel bank left, at the sheet’s products and rates, nothing taken from stock
    • Own fields: wind speed and direction, Delta T, applicator [aerial operator], licence [number]; Field 9 wind marked not recorded
    • records.createField 9 note, wind to get from [aerial operator]
  8. 7:17am+3 sec

    Cotton crop monitor Done

    Defoliation logged on Fields 6, 7 and 9 with the myBMP fields filled; Field 9’s wind marked missing for you to get from [aerial operator]; the sheet kept in Documents against all three

An example with made-up data. Names and figures in [brackets] are placeholders.

The agent behind it

Cotton crop monitorCropping

The Cotton crop monitor keeps the season’s checks together: square counts, insect checks, defoliation timing, modules and gin results.

What it won’t do

  • Recommend sprays or defoliation timing: that’s your agronomist’s call
  • Make up a count
  • Change gin results

More jobs the Cotton crop monitor does.

The farm software this job works from

Put [AGENT NAME] to work on your farm.

We’re taking a small number of pilot farms in Australia. Start with one or two agents and add more as you go.

Pilot farms wanted

Want to try it out?

Join the pilot, or book a demo and we’ll walk you through this job on a farm like yours. You text the team from your phone. Some connections are still being built, and we’ll tell you which.

  • SMS and voice notes
  • Nothing to install

Free report

Getting started with AI.

A free practical guide for Australian farms and agribusinesses

Where AI actually helps on a farm, what it needs from you, the risks to watch, and a 90-day plan to start small.

  • Where it actually helps
  • What it needs from you
  • Risks and guardrails
  • Working out the return
Book a demoJoin the pilot