Turn your head counts into a yield estimate before harvest
Head counts are the best check on the model before harvest, but the sums are fiddly and the grain weight guess makes a big difference. Done in the ute, the numbers rarely make it into the marketing plan or the storage plan.
The Yield forecaster works the counts into a tonnes per hectare estimate with the grain weight it assumed, compares it with the season model and any satellite image you’ve sent and gives you a figure for the paddock.
- When · On demand
- “Did some counts in 9: 310 heads per square metre, about 28 grains a head”
- You get
- Yield estimate from the counts; the grain weight used; comparison with the model; paddock tonnes reworked
- Approval level
- Inform. Tells you what’s happening. Does nothing. You can change it.
What it reads
- Heads per square metre and grains per head from the farmer
- Variety and typical grain weight
- Season rainfall and soil water
- Satellite images you send for the paddock
What you get
- A yield estimate from the counts with the working shown
- A range for a light or heavy grain fill
- How it compares with the season model
- New paddock tonnes for storage and marketing
When it stops and asks you
- Counts were taken in only one part of the paddock
- The grain weight is likely to be lower after a hot finish
- The counts and the model are more than 20% apart
How often
Once or twice per paddock in the month before harvest
Who uses it
OwnersManagersAdvisors and consultants
What it uses
SMS and voice notes
Text the team, send a voice note or a photo, or forward a message. There’s no new app to learn.
SILO weather history
It gives the team daily rainfall and temperature for your location, back to 1889, to use in every feed budget.
The last 2 make it better, but it works without them.
Nothing official leaves the farm without your yes.This job runs at Inform: tells you what’s happening. Does nothing. You can change that any time.
The conversation
How the job plays out, step by step.
Yield forecaster
Started 7:12am · On demand
- Start to done
- 3 min
- Agent actions
- 6
- Needed you
- 2×
[AGENT NAME]For the Yield forecasterDid some counts in 9: 310 heads per square metre, about 28 grains a head.
You · 7:12am

Thanks. How many spots did you count, and was it across the paddock or one end?
[AGENT NAME] · 7:12am
5 spots, spread out. Avoided the sandy rise.
You · 7:14am

Yield forecaster
Worked the counts into tonnes per hectare and checked against the model and satellite

That works out to 3.1 to 3.5 t/ha depending on grain fill, 3.3 in the middle. Model says 3.1, so they agree. The sandy rise is about 15% of the paddock and looks weaker on satellite, so I’d call the whole paddock about 3.1. That’s roughly 440 t off 142 ha.
[AGENT NAME] · 7:14am

Yield forecaster
Worked out Paddock 9’s estimate and the harvest tonnes
Done · 7:15am4 saved
- A yield estimate from the counts with the working shownSaved
- A range for a light or heavy grain fillSaved
- How it compares with the season modelSaved
- New paddock tonnes for storage and marketingSaved
Behind the scenes
7:12am
You ask
“Did some counts in 9: 310 heads per square metre, about 28 grains a head.”
7:12am+2 sec
[AGENT NAME] messages you
“Thanks. How many spots did you count, and was it across the paddock or one end?”
7:14am+3 min
You reply
“5 spots, spread out. Avoided the sandy rise.”
7:14am+16 sec
Yield forecaster works on it · 4 steps
Worked the counts into tonnes per hectare and checked against the model and satellite
- 310 × 28 = 8,680 grains/m²
- Grain weight for [variety]: 36 to 40 mg
- Season model: 3.1 t/ha
satellite.readimage you sent, sandy rise about 15% of paddock, lower vigour
7:14am+2 sec
[AGENT NAME] messages you
“That works out to 3.1 to 3.5 t/ha depending on grain fill, 3.3 in the middle. Model says 3.1, so they agree. The sandy rise is about 15% of the paddock and looks weaker on satellite, so I’d call the whole paddock about 3.1. That’s roughly 440 t off 142 ha.”
7:15am+10 sec
Yield forecaster works on it · 2 steps
Worked out Paddock 9’s estimate and the harvest tonnes
records.searchPaddock 9, 142 ha- Set out for you: yield update
7:15am+3 sec
Yield forecaster Done
Paddock 9 estimate of 3.1 t/ha sent to you with the counts and working; 440 t to use for storage and marketing
An example with made-up data. Names and figures in [brackets] are placeholders.
The agent behind it
Yield forecasterCroppingThe Yield forecaster estimates yield from rainfall, soil water and crop checks, and updates it through the season.
What it won’t do
- Promise a yield
- Sell or price grain
- Give a number without saying what it’s based on
More jobs the Yield forecaster does.
- Update the yield estimate after a good rainDaily
- A monthly yield range from spring onScheduled
- Re-estimate yield after a frost at floweringDaily
- Send harvest tonnes by paddock to plan bins and trucksScheduled
- Flag a paddock falling behind the rest on satelliteDaily
- Check the rain gauges against SILO before the yield estimateScheduled
Put [AGENT NAME] to work on your farm.
We’re taking a small number of pilot farms in [REGION]. Start with one or two agents and add more as you go.
See it on a farm like yours.
30 minutes with Thomas, our founder, on records like your own.
Livestock, paddocks, visitors and tanks, in one place.
The farm management software comes with every plan. Keep the software you already use, or use ours.
Not ready yet? Start with a free calculator.
The sums you do every week, for stock, pasture, crops and the books. No sign-up.
Watch a job before you commit.
Pick a playbook and see it play out, step by step.


