Get eyes on a trough when its sensor goes quiet
A quiet sensor still shows its last level, so a trough that read 61% at 4 am looks fine at lunchtime. In summer 400 steers can’t go a day without water, and the day the float sticks is the day nobody drives out because the screen looked OK.
The Water officer works out whether it’s the sensor or the water from its battery and the sensors around it, says plainly the trough is unknown rather than trusting the last level and puts a check on the morning run.
- When · Daily
- Monitoring puts the Bottom trough under Needs a look: no reading for 6 hours, with 400 steers drinking from it
- You get
- Sensor called offline, not full; what probably stopped it; a trough check on today’s run; the hand reading saved and a battery job once someone’s looked
- Approval level
- Act and tell. Does it and logs it. You hear about it after. You can change it.
What it reads
- Monitoring: Bottom trough, last reading 61% at 3:40 am, battery 9%
- The other troughs on the same sensor feed, and whether they’re still reporting
- Bottom paddock: 400 steers
- Job list: today’s water run
What you get
- A plain message that the trough level is unknown, not 61%
- Whether it looks like the sensor’s battery or the whole feed dropping out
- A trough check on today’s run
- The hand reading saved so the chart has no gap, and a battery job
When it stops and asks you
- Several sensors went quiet at once, which points to the feed, not one trough
- There’s nobody on the place to check it today
- The trough was dropping fast before it went quiet
How often
A few times a season, whenever a sensor stops reporting
Who uses it
ManagersFarm staff
What it uses
Water monitors and weather stations
Trough, tank and rain gauge readings would start jobs for the team.
SMS and voice notes
Text the team, send a voice note or a photo, or forward a message. There’s no new app to learn.
The last one makes it better, but it works without it.
Nothing official leaves the farm without your yes.This job runs at Act and tell: does it and logs it. You hear about it after. You can change that any time.
The conversation
How the job plays out, step by step.
Water officer
Started 5:40am · Daily
- Start to done
- 6 min
- Agent actions
- 7
- Needed you
- 1×
[AGENT NAME]For the Water officerDaily check · 5:40am
Bottom trough sensor has had no reading since 3:40 am, 6 hours ago

Water officer
Checked what the trough was doing before it stopped and whether anything else went quiet

Water officer
Put a trough check on this morning’s run

The Bottom trough sensor has been offline since 3:40 am. Last reading was 61%, but I can’t tell you what it is now. Its battery was down to 9% and the Creek and Lane troughs are still reporting, so it’s probably the battery. 400 steers on it, so there’s a check on [staff]’s run this morning.
[AGENT NAME] · 5:40am
Trough’s full, float’s fine. Sensor’s flat. Call it 95%.
Staff · 5:45am

Water officer
Saved the hand reading and added the battery job
Done · 5:45am4 saved
- A plain message that the trough level is unknown, not 61%Saved
- Whether it looks like the sensor’s battery or the whole feed dropping outSaved
- A trough check on today’s runSaved
- The hand reading saved so the chart has no gap, and a battery jobSaved
Behind the scenes
5:40am
Trigger Daily check
Bottom trough sensor has had no reading since 3:40 am, 6 hours ago
- Monitoring: Needs a look, Bottom trough, no reading for 6 hours
5:40am+13 sec
Water officer works on it · 3 steps
Checked what the trough was doing before it stopped and whether anything else went quiet
sensors.read_waterBottom trough steady around 60% overnight, battery 9% and falling all week- Creek and Lane troughs on the same feed: reporting normally
- Bottom paddock: 400 steers
5:40am+10 sec
Water officer works on it · 2 steps
Put a trough check on this morning’s run
jobs.createCheck Bottom trough and float, today by 11 am, [staff]alerts.send[staff], Bottom trough sensor offline
5:40am+2 sec
[AGENT NAME] messages you
“The Bottom trough sensor has been offline since 3:40 am. Last reading was 61%, but I can’t tell you what it is now. Its battery was down to 9% and the Creek and Lane troughs are still reporting, so it’s probably the battery. 400 steers on it, so there’s a check on [staff]’s run this morning.”
5:45am+5 min
Staff replies
“Trough’s full, float’s fine. Sensor’s flat. Call it 95%.”
5:45am+10 sec
Water officer works on it · 2 steps
Saved the hand reading and added the battery job
records.log_readingBottom trough 95%, by hand, [staff], 10:20 amjobs.createReplace battery in Bottom trough sensor, this week, [staff]
5:45am+3 sec
Water officer Done
Bottom trough shows today’s hand reading of 95%; the check is done; battery job on the list; the sensor stays offline until it reports again
An example with made-up data. Names and figures in [brackets] are placeholders.
The agent behind it
Water officerLand & feedThe Water officer watches troughs, tanks and dams.
What it won’t do
- Switch a pump on or off remotely without your say
- Assume a sensor is right when it stops reporting; it says the sensor is offline
More jobs the Water officer does.
The farm software this job works from
Put [AGENT NAME] to work on your farm.
We’re taking a small number of pilot farms in [REGION]. Start with one or two agents and add more as you go.
See it on a farm like yours.
30 minutes with Thomas, our founder, on records like your own.
Livestock, paddocks, visitors and tanks, in one place.
The farm management software comes with every plan. Keep the software you already use, or use ours.
Not ready yet? Start with a free calculator.
The sums you do every week, for stock, pasture, crops and the books. No sign-up.
Watch a job before you commit.
Pick a playbook and see it play out, step by step.


