Skip to content
Agentic Ag

Calculators & toolsHealth and treatments

Footbath and dip mix calculator

Enter the bath size and the strength you want. Get the litres in the bath and the product to add.

Leave blank for a typical 10%. Use the label’s strength.

Use this instead of the bath size if you know it.

Zinc sulphate to add

14.4 kg

For 144 L at 10% w/v

Bath volume
144 L
3 × 0.6 m at 8 cm deep
Water
144 L
Dissolve the product in it

Rather not work this out each time?The team can keep track of it for you, from your own records.

See it in a demo

General guidance only. Follow the product label for strength, standing time and safety gear, check with your vet, and dispose of used baths safely.

How it’s worked out

  • Bath volume in litres = length (m) × width (m) × liquid depth (m) × 1000.
  • Product = strength % × litres ÷ 100. A % w/v strength gives kg of solid; a % v/v strength gives litres of liquid.
  • Strengths are of the product as sold. Top up with product as the bath is used and fouled, or empty and remix it.

Where to next

Three ways to see if it suits your farm.

Start with whichever feels right.

Or book a 30-minute demo
  1. 1Read

    Get the free report

    Getting started with AI. Where AI earns its keep on a farm, and a 90-day plan to start small.

  2. 2Watch

    See a job, step by step

    Pick a job from the library and see what sets it off, who does it and what you end up with.

  3. 3Try

    Put it on your own records

    We’re taking a small number of pilot farms in [REGION]. Start with one or two agents.

Book a demoJoin the pilot