Skip to content
Agentic Ag

Calculators & toolsPasture and grazing

Plate meter pasture cover calculator

Turn the average plate meter reading into pasture cover (kg of dry matter per hectare, or kg DM/ha), and the feed in the paddock.

Meter reads in

The average of all readings across the paddock.

Slope and intercept are the two numbers in your meter’s calibration equation. They vary by season and pasture type, so check your meter’s or your region’s.

The feed you want to leave in the paddock.

Pasture cover

1,900 kg DM/ha

140 × 10 + 500

Total feed
28.5 t DM
over 15 ha
Above the residual
10.5 t DM
leaving 1,200 kg DM/ha

Rather not work this out each time?The team can keep track of it for you, from your own records.

See it in a demo

General guidance only. The answer is an estimate from the figures you enter, so check it against your own records and advice.

How it’s worked out

  • Cover = slope × average reading + intercept.
  • Total feed = cover × area. Feed above the residual = (cover − residual) × area.
  • The default 140 × height in cm + 500 is a generic equation. Calibrate by cutting and drying quadrats for your own.

Where to next

Three ways to see if it suits your farm.

Start with whichever feels right.

Or book a 30-minute demo
  1. 1Read

    Get the free report

    Getting started with AI. Where AI earns its keep on a farm, and a 90-day plan to start small.

  2. 2Watch

    See a job, step by step

    Pick a job from the library and see what sets it off, who does it and what you end up with.

  3. 3Try

    Put it on your own records

    We’re taking a small number of pilot farms in [REGION]. Start with one or two agents.

Book a demoJoin the pilot