Skip to content
Agentic Ag

Calculators & toolsFeed and growth

Silage and hay tonnes calculator

Measure the bunker or count the bales. See the tonnes of fodder on hand and how long it will feed a mob.

A typical figure. Weigh a few bales or a load for your own.

Fresh weight

390 t

Bunker or pit silage

Dry matter
136.5 t DM
at 35% DM
Volume
600 m³
at 650 kg/m³
Days of feed
114
100 head at 12 kg DM a day

Rather not work this out each time?The team can keep track of it for you, from your own records.

See it in a demo

General guidance only. The answer is an estimate from the figures you enter, so check it against your own records and advice.

How it’s worked out

  • Volume: bunker = length × width × average height; round bales = π × (diameter ÷ 2)² × width × bales; square bales = length × width × height × bales.
  • Tonnes fresh = volume × density ÷ 1000. Tonnes DM = tonnes fresh × DM %.
  • Days of feed = kg DM ÷ (head × intake). Allow for losses in feeding out, which this leaves out.

Where to next

Three ways to see if it suits your farm.

Start with whichever feels right.

Or book a 30-minute demo
  1. 1Read

    Get the free report

    Getting started with AI. Where AI earns its keep on a farm, and a 90-day plan to start small.

  2. 2Watch

    See a job, step by step

    Pick a job from the library and see what sets it off, who does it and what you end up with.

  3. 3Try

    Put it on your own records

    We’re taking a small number of pilot farms in [REGION]. Start with one or two agents.

Book a demoJoin the pilot