Skip to content
Agentic Ag

Calculators & toolsCrops, spraying and horticulture

Sprayer calibration calculator

Work out the spray volume from your nozzle output, spacing and speed, or the nozzle output you need for a target L/ha.

Work out

Catch one nozzle for a minute in a jug. Check several across the boom.

Spray volume

80 L/ha

1.2 L/min a nozzle at 18 km/h and 50 cm spacing

In a 30-second catch
600 mL
from each nozzle
Each 10 m of boom
18 ha an hour
before turns and refills

Rather not work this out each time?The team can keep track of it for you, from your own records.

See it in a demo

General guidance only. Always follow the product label, including mixing order, water rates, weather conditions, PPE and withholding periods.

How it’s worked out

  • Spray volume (L/ha) = 600 × nozzle output (L/min) ÷ (speed km/h × nozzle spacing in m).
  • Nozzle output needed (L/min) = target L/ha × speed km/h × spacing m ÷ 600.
  • Output rises with the square root of pressure, so doubling the output needs about four times the pressure. Change nozzles or speed for big changes.
  • Replace nozzles that run more than about 10% above the average, and recheck speed on the ground, not just the dash.

Where to next

Three ways to see if it suits your farm.

Start with whichever feels right.

Or book a 30-minute demo
  1. 1Read

    Get the free report

    Getting started with AI. Where AI earns its keep on a farm, and a 90-day plan to start small.

  2. 2Watch

    See a job, step by step

    Pick a job from the library and see what sets it off, who does it and what you end up with.

  3. 3Try

    Put it on your own records

    We’re taking a small number of pilot farms in [REGION]. Start with one or two agents.

Book a demoJoin the pilot