Skip to content
Agentic Ag

Calculators & toolsFarm business

Work rate and fuel calculator

Enter the implement width, speed and field efficiency. Get hectares an hour, how long the job takes, and the fuel per hectare and in total.

Time working out of time in the paddock, after turns, filling and overlap. Leave blank for a typical 75%.

Work rate

7.2 ha/hr

12 m at 8 km/h and 75% field efficiency

Hours for the job
69.4
500 ha
Fuel per hectare
4.17 L/ha
2,083 L in total
Fuel cost
$7.92/ha
$3,958 in total

Rather not work this out each time?The team can keep track of it for you, from your own records.

See it in a demo

General guidance only. The answer is an estimate from the figures you enter, so check it against your own records and advice.

How it’s worked out

  • Hectares an hour = width (m) × speed (km/h) × field efficiency ÷ 10, since 1 km/h across 1 m covers 0.1 ha an hour.
  • Typical field efficiency: seeding about 75%, spraying about 65%, harvest about 70%, cultivation about 80%, spreading about 70%. Small or odd-shaped paddocks and long fills bring it down.
  • Hours = area ÷ ha/hr. Fuel per hectare = L/hr ÷ ha/hr, and fuel cost = L/ha × $/L.

Where to next

Three ways to see if it suits your farm.

Start with whichever feels right.

Or book a 30-minute demo
  1. 1Read

    Get the free report

    Getting started with AI. Where AI earns its keep on a farm, and a 90-day plan to start small.

  2. 2Watch

    See a job, step by step

    Pick a job from the library and see what sets it off, who does it and what you end up with.

  3. 3Try

    Put it on your own records

    We’re taking a small number of pilot farms in [REGION]. Start with one or two agents.

Book a demoJoin the pilot