Get every machine’s hours and km at 30 June
The accountant asks for the ute’s odometer at 30 June in September, and by then nobody wrote it down. The same readings set the year’s cost per hour for each machine and let the fuel be checked against the work.
The Machinery keeper lists every machine on the service records, puts a job on the list to read each one’s hours or odometer by 30 June and logs the readings as they come in.
- When · Scheduled
- The last week of June
- You get
- A reading job for each shed with every machine in it; hours or km at 30 June on each machine’s record; the gaps chased before staff head out; the list ready for the fuel and power watcher and the accountant
- Approval level
- Act and tell. Does it and logs it. You hear about it after. You can change it.
What it reads
- Machinery services: every machine named in the last two years and its last hours or km
- Hours and km texted in during June
- Machines sold or written off during the year
What you get
- One reading job per shed, with every machine in it listed
- Hours or km at 30 June on each machine’s record
- The machines still without a reading, chased before they head out
- The year’s readings passed to the fuel and power watcher
When it stops and asks you
- A machine on the list has been sold or written off
- A reading is lower than the last one
- A machine is away at the dealer or on another property
How often
Once a year, the last week of June
Who uses it
OwnersFarm staffThe farm office
What it uses
SMS and voice notes
Text the team, send a voice note or a photo, or forward a message. There’s no new app to learn.
Nothing official leaves the farm without your yes.This job runs at Act and tell: does it and logs it. You hear about it after. You can change that any time.
The conversation
How the job plays out, step by step.
2 agents on it
Started 6:00am · Scheduled
- Start to done
- 11 min
- Agent actions
- 7
- Needed you
- 2×
[AGENT NAME]For the Machinery keeperOn schedule · 6:00am
Last week of June: 30 June readings needed for 11 machines

Machinery keeper
Put a reading job on the list for each shed


Machinery keeper → Operations lead
Asked the operations lead to give the two reading jobs to whoever is on that week
Shed’s done. Tractor 1 is 5,388, Tractor 2 is 6,702, loader 4,466, header 2,941, sprayer 1,233.
Staff · 6:05am

Machinery keeper
Logged the shed readings against each machine

Got the five from the shed, and the quad and side-by-side came in Tuesday. Still missing the two utes, the truck and the generator. Can someone read the utes and the truck before they head out in the morning?
[AGENT NAME] · 6:05am
Grey ute 148,220 km, new ute 61,904, truck 302,115. Genny 1,961.
Staff · 6:10am

Machinery keeper
Logged the rest and passed the year’s readings on
Done · 6:10am4 saved
- One reading job per shed, with every machine in it listedSaved
- Hours or km at 30 June on each machine’s recordSaved
- The machines still without a reading, chased before they head outSaved
- The year’s readings passed to the fuel and power watcherSaved
Behind the scenes
6:00am
Trigger On schedule
Last week of June: 30 June readings needed for 11 machines
- Machinery services: 11 machines named in the last two years
6:00am+10 sec
Machinery keeper works on it · 2 steps
Put a reading job on the list for each shed
jobs.createMachinery shed: hours on both tractors, the loader, the header and the sprayer by 30 Junejobs.createWorkshop and house: km on both utes and the truck, hours on the side-by-side, the quad and the generator by 30 June
6:00am+6 sec
→ Operations lead picks it up
Asked the operations lead to give the two reading jobs to whoever is on that week
6:05am+5 min
Staff replies
“Shed’s done. Tractor 1 is 5,388, Tractor 2 is 6,702, loader 4,466, header 2,941, sprayer 1,233.”
6:05am+10 sec
Machinery keeper works on it · 2 steps
Logged the shed readings against each machine
machinery.read_hours5 readings, none lower than the lastrecords.log_service30 June readings for both tractors, the loader, the header and the sprayer
6:05am+2 sec
[AGENT NAME] messages you
“Got the five from the shed, and the quad and side-by-side came in Tuesday. Still missing the two utes, the truck and the generator. Can someone read the utes and the truck before they head out in the morning?”
6:10am+5 min
Staff replies
“Grey ute 148,220 km, new ute 61,904, truck 302,115. Genny 1,961.”
6:10am+10 sec
Machinery keeper works on it · 2 steps
Logged the rest and passed the year’s readings on
records.log_service30 June readings for both utes, the truck and the generator- Sent to the fuel and power watcher: 11 machines, hours and km at 30 June
6:10am+3 sec
Machinery keeper Done
All 11 machines have their 30 June hours or km on their records; the list ready for the accountant and for checking the year’s fuel against the work
An example with made-up data. Names and figures in [brackets] are placeholders.
The agent behind it
Machinery keeperOperationsThe Machinery keeper tracks service schedules, registrations and repairs for everything with an engine.
What it won’t do
- Book a mechanic without your approval
- Tell you a machine is safe to use after a fault; that’s for whoever fixes it
More jobs the Machinery keeper does.
- Service machinery on hours, not memoryScheduled
- Track rego, insurance and licencesScheduled
- Notice when a machine starts drinking fuelDaily
- Log machine hours from a textOn demand
- Get the header serviced and checked before harvest startsScheduled
- Get the header going again when it breaks down mid-harvestOn demand
The farm software this job works from
Put [AGENT NAME] to work on your farm.
We’re taking a small number of pilot farms in Australia. Start with one or two agents and add more as you go.
See it on a farm like yours.
30 minutes with Thomas, our founder, on records like your own.
Livestock, paddocks, visitors and tanks, in one place.
The farm management software comes with every plan. Keep the software you already use, or use ours.
Not ready yet? Start with a free calculator.
The sums you do every week, for stock, pasture, crops and the books. No sign-up.
Watch a job before you commit.
Pick a playbook and see it play out, step by step.

