Find out why a rake of cane came in with low CCS
A low CCS rake costs you on every tonne, and the cause could be dirt, tops left in, a delay at the siding or the cane itself. Without the figures side by side, the conversation with the harvester crew goes nowhere.
The Cane harvest liaison pulls the rake’s mill figures, compares CCS (sugar content), extraneous matter (trash and dirt) and time from cut to crush with earlier rakes from the same block and shows which one moved.
- When · On demand
- “Why was the CCS so low on the last rake from Block 3?”
- You get
- The rake’s CCS, extraneous matter and cut-to-crush time; comparison with earlier rakes; the likely cause and what to ask the harvester crew or mill
- Approval level
- Inform. Tells you what’s happening. Does nothing. You can change it.
- Useful for
- Irrigated crops
What it reads
- Mill rake reports: CCS, extraneous matter, pol, fibre
- Cut and crush times
- Block records: variety, ratoon, burnt or green
What you get
- The rake’s figures against the block’s earlier rakes
- Which measure moved most
- Questions to take to the harvester crew or the mill
When it stops and asks you
- The mill report doesn’t give cut-to-crush time
- The rake was mixed from two blocks
- The variety on file might be wrong
How often
A few times a crush when a rake disappoints
Who uses it
OwnersManagers
What it uses
Inbound email
Forward invoices, kill sheets, NVDs, soil tests and emails from your stock agent to your own farm address. The team reads each one, sums it up and suggests who handles it.
The last one makes it better, but it works without it.
Nothing official leaves the farm without your yes.This job runs at Inform: tells you what’s happening. Does nothing. You can change that any time.
The conversation
How the job plays out, step by step.
Cane harvest liaison
Started 7:12am · On demand
- Start to done
- 3 min
- Agent actions
- 5
- Needed you
- 2×
[AGENT NAME]For the Cane harvest liaisonWhy was the CCS so low on the last rake from Block 3?
You · 7:12am

Cane harvest liaison
Pulled the rake’s figures and the block’s earlier rakes this season

Rake [number] from Block 3 was CCS 11.9, against 13.4 to 13.8 earlier. The big change is extraneous matter: 9.8%, up from 5 to 6%. Cut-to-crush was 14 hours, same as usual. So it looks like more trash and dirt in the bin, not the cane. Was it cut wet?
[AGENT NAME] · 7:12am
Cut the morning after 20 mm. Wet as.
You · 7:14am

Cane harvest liaison
Noted the wet cut and checked the group average on the report

Group average EM was 8.1% that day, so everyone’s was up. Yours was higher again. Worth asking the crew about extractor fan speed in wet conditions. It’s worth a note on Block 3.
[AGENT NAME] · 7:14am
Done · 7:15am3 saved
- The rake’s figures against the block’s earlier rakesSaved
- Which measure moved mostSaved
- Questions to take to the harvester crew or the millSaved
Behind the scenes
7:12am
You ask
“Why was the CCS so low on the last rake from Block 3?”
7:12am+13 sec
Cane harvest liaison works on it · 3 steps
Pulled the rake’s figures and the block’s earlier rakes this season
pdf.extractmill report [date]- Rake [number]: CCS 11.9, EM 9.8%
- Earlier Block 3 rakes: CCS 13.4 to 13.8, EM 5 to 6%
7:12am+2 sec
[AGENT NAME] messages you
“Rake [number] from Block 3 was CCS 11.9, against 13.4 to 13.8 earlier. The big change is extraneous matter: 9.8%, up from 5 to 6%. Cut-to-crush was 14 hours, same as usual. So it looks like more trash and dirt in the bin, not the cane. Was it cut wet?”
7:14am+3 min
You reply
“Cut the morning after 20 mm. Wet as.”
7:14am+10 sec
Cane harvest liaison works on it · 2 steps
Noted the wet cut and checked the group average on the report
- Ready to add to your records: Block 3 rake note, cut after 20 mm
- Mill report shows the group average EM was 8.1% that day
7:14am+2 sec
[AGENT NAME] messages you
“Group average EM was 8.1% that day, so everyone’s was up. Yours was higher again. Worth asking the crew about extractor fan speed in wet conditions. It’s worth a note on Block 3.”
7:15am+3 sec
Cane harvest liaison Done
Rake comparison sent to you with the wet cut noted, ready for Block 3’s record; question for the harvester crew listed
- Set out for you: rake comparison
An example with made-up data. Names and figures in [brackets] are placeholders.
The agent behind it
Cane harvest liaisonCroppingThe Cane harvest liaison keeps track of harvest rounds, mill deliveries and CCS results by block.
What it won’t do
- Change the harvest round
- Talk to the mill for you
- Make up a CCS figure
More jobs the Cane harvest liaison does.
- Read the mill’s weekly CCS reportDaily
- Track cane delivered against the mill allocationScheduled
- Show what’s left to cut when rain stops the cane harvestDaily
- Flag the cane blocks at risk of standing overScheduled
- Draft the pre-season cane estimate for the millScheduled
- Put the mill’s season summary on each cane block’s recordScheduled
Put [AGENT NAME] to work on your farm.
We’re taking a small number of pilot farms in Australia. Start with one or two agents and add more as you go.
See it on a farm like yours.
30 minutes with Thomas, our founder, on records like your own.
Livestock, paddocks, visitors and tanks, in one place.
The farm management software comes with every plan. Keep the software you already use, or use ours.
Not ready yet? Start with a free calculator.
The sums you do every week, for stock, pasture, crops and the books. No sign-up.
Watch a job before you commit.
Pick a playbook and see it play out, step by step.


