Keep the service count right when an hour meter is replaced
When a dash or hour meter is replaced the hours start again near nought, and every service worked out from them goes wrong. The tractor runs hundreds of hours past its service because the meter says it’s nearly new.
The Machinery keeper catches an hours reading that has gone backwards, finds out why before logging it and records the meter swap with the old hours carried over so services stay on true hours.
- When · On demand
- “Tractor 2’s at 12 hours”, texted by Sam, when its last reading was 6,380
- You get
- The odd reading held until someone says why; the meter swap on the service record with the hours it was swapped at; the next service worked out on true hours; new-meter readings added to the old total
- Approval level
- Act and tell. Does it and logs it. You hear about it after. You can change it.
What it reads
- Machinery services: Tractor 2’s last hours and last service
- The hours text and who sent it
- Service notes: any dash or meter work at the dealer
What you get
- A reading that went backwards held until someone says why
- The meter swap recorded with the hours it happened at
- The next service worked out on the tractor’s true hours
- Future readings from the new meter added to the old total
When it stops and asks you
- The reading could be from another machine of the same make
- Nobody knows what the old meter read when it came out
- The dealer’s paperwork gives different hours to what’s on the record
How often
Rare, but it throws every service off when it happens
Who uses it
Farm staffManagers
What it uses
SMS and voice notes
Text the team, send a voice note or a photo, or forward a message. There’s no new app to learn.
Nothing official leaves the farm without your yes.This job runs at Act and tell: does it and logs it. You hear about it after. You can change that any time.
The conversation
How the job plays out, step by step.
Machinery keeper
Started 7:12am · On demand
- Start to done
- 6 min
- Agent actions
- 5
- Needed you
- 2×
[AGENT NAME]For the Machinery keeperTractor 2’s at 12 hours.
Staff · 7:12am

Machinery keeper
Checked the reading against the record before logging it

The last hours I have for Tractor 2 are 6,380, a month ago, so 12 can’t be right as it stands. Is it definitely Tractor 2, or has its meter been changed?
[AGENT NAME] · 7:12am
Yep, Tractor 2. The dealer put a new dash in when it was in for the gearbox. Old one said 6,402 when it came out.
Staff · 7:17am

Machinery keeper
Logged the dash swap with the old hours carried over

Machinery keeper
Moved the next service onto the new meter

Done. Tractor 2 is on 6,414 true hours: 6,402 on the old meter and 12 on the new one. Its next service is due at 6,550, which is 148 on the new meter, about 136 hours away. From now on I’ll add the new meter’s hours to the old.
[AGENT NAME] · 7:17am
Done · 7:17am4 saved
- A reading that went backwards held until someone says whySaved
- The meter swap recorded with the hours it happened atSaved
- The next service worked out on the tractor’s true hoursSaved
- Future readings from the new meter added to the old totalSaved
Behind the scenes
7:12am
Staff asks
“Tractor 2’s at 12 hours.”
7:12am+10 sec
Machinery keeper works on it · 2 steps
Checked the reading against the record before logging it
machinery.read_hoursTractor 2, last 6,380 hours on [date]; 12 is lower- Machinery services: last 500-hour service at 6,050 hours, next due at 6,550
7:12am+2 sec
[AGENT NAME] messages you
“The last hours I have for Tractor 2 are 6,380, a month ago, so 12 can’t be right as it stands. Is it definitely Tractor 2, or has its meter been changed?”
7:17am+5 min
Staff replies
“Yep, Tractor 2. The dealer put a new dash in when it was in for the gearbox. Old one said 6,402 when it came out.”
7:17am+10 sec
Machinery keeper works on it · 2 steps
Logged the dash swap with the old hours carried over
records.log_serviceTractor 2, dash and hour meter replaced at [dealer], old meter 6,402 hours (from Sam), new meter started at 0- Your own field on the record: hours to add to the new meter, 6,402
7:17am+7 sec
Machinery keeper works on it · 1 step
Moved the next service onto the new meter
reminders.createTractor 2, 500-hour service at 6,550 true hours, 148 on the new meter
7:17am+2 sec
[AGENT NAME] messages you
“Done. Tractor 2 is on 6,414 true hours: 6,402 on the old meter and 12 on the new one. Its next service is due at 6,550, which is 148 on the new meter, about 136 hours away. From now on I’ll add the new meter’s hours to the old.”
7:17am+3 sec
Machinery keeper Done
Dash swap on Tractor 2’s service record; true hours 6,414; next service at 148 on the new meter; later readings carried on from the old total
An example with made-up data. Names and figures in [brackets] are placeholders.
The agent behind it
Machinery keeperOperationsThe Machinery keeper tracks service schedules, registrations and repairs for everything with an engine.
What it won’t do
- Book a mechanic without your approval
- Tell you a machine is safe to use after a fault; that’s for whoever fixes it
More jobs the Machinery keeper does.
- Service machinery on hours, not memoryScheduled
- Track rego, insurance and licencesScheduled
- Notice when a machine starts drinking fuelDaily
- Log machine hours from a textOn demand
- Get the header serviced and checked before harvest startsScheduled
- Get the header going again when it breaks down mid-harvestOn demand
The farm software this job works from
Put [AGENT NAME] to work on your farm.
We’re taking a small number of pilot farms in [REGION]. Start with one or two agents and add more as you go.
See it on a farm like yours.
30 minutes with Thomas, our founder, on records like your own.
Livestock, paddocks, visitors and tanks, in one place.
The farm management software comes with every plan. Keep the software you already use, or use ours.
Not ready yet? Start with a free calculator.
The sums you do every week, for stock, pasture, crops and the books. No sign-up.
Watch a job before you commit.
Pick a playbook and see it play out, step by step.


