Redo the crop tonnes after the paddocks come in from the KML
Paddock areas typed in years ago from the rates notice take in the dam, the creek line and the corner nobody crops. Tonnes forecast on those hectares run high, and grain gets forward-sold that was never going to come off.
The Yield forecaster takes each paddock’s area from its new shape, reworks the expected tonnes and how much of each crop is priced and shows which paddocks moved most.
- When · On demand
- “Brought the paddocks in from [agronomist]’s KML. Does that change the tonnes?”
- You get
- Old and new hectares by paddock; expected tonnes before and after; the share of each crop priced on the new tonnes
- Approval level
- Recommend. Suggests an action. You do it. You can change it.
What it reads
- Paddocks: area before the import and the area from the new shape
- This month’s yield estimate by paddock in t/ha
- Contracts and pools: tonnes priced by crop
- Which paddocks are cropped this season
What you get
- Each paddock’s area before and after, biggest changes first
- Expected tonnes by crop on the mapped areas
- The share of each crop already priced, on the new tonnes
- The new tonnes passed to the grain marketer
When it stops and asks you
- A new shape takes in a lane or dam that isn’t cropped
- Two old paddocks came in as one shape
- An area moved more than 10% and nobody knows why
How often
Once when paddocks are first mapped, then after a boundary changes
Who uses it
OwnersManagersAdvisors and consultants
What it uses
SMS and voice notes
Text the team, send a voice note or a photo, or forward a message. There’s no new app to learn.
Nothing official leaves the farm without your yes.This job runs at Recommend: suggests an action. You do it. You can change that any time.
The conversation
How the job plays out, step by step.
2 agents on it
Started 7:12am · On demand
- Start to done
- 6 min
- Agent actions
- 5
- Needed you
- 3×
[AGENT NAME]For the Yield forecasterBrought the paddocks in from [agronomist]’s KML. Does that change the tonnes?
You · 7:12am

Yield forecaster
Compared each paddock’s area before and after the import

The shapes come to 1,512 cropped ha, 108 less than we had. Paddock 3 lost 22 ha, 10 lost 17 and Back flat 12. Does 3’s new shape leave out the swamp corner? If so it’s right.
[AGENT NAME] · 7:12am
Yep, the swamp’s never been cropped. 10 has the old house block cut out too.
You · 7:14am

Yield forecaster
Reworked the tonnes on the mapped areas

On the mapped areas wheat comes to about 2,330 t, so the 1,600 t you’ve priced is 69% of it, not 65%. Barley’s about 1,090 t. Put that in this month’s report and give the grain marketer the new tonnes?
[AGENT NAME] · 7:14am
Yes, send it to him.
You · 7:17am


Yield forecaster → Grain marketer
Expected wheat now 2,330 t and barley 1,090 t on mapped areas; 69% of the wheat priced
Done · 7:17am4 saved
- Each paddock’s area before and after, biggest changes firstSaved
- Expected tonnes by crop on the mapped areasSaved
- The share of each crop already priced, on the new tonnesSaved
- The new tonnes passed to the grain marketerSaved
Behind the scenes
7:12am
You ask
“Brought the paddocks in from [agronomist]’s KML. Does that change the tonnes?”
7:12am+10 sec
Yield forecaster works on it · 2 steps
Compared each paddock’s area before and after the import
records.search14 cropped paddocks, 1,620 ha before, 1,512 ha from the shapes- Biggest drops: Paddock 3 down 22 ha, Paddock 10 down 17 ha, Back flat down 12 ha
7:12am+2 sec
[AGENT NAME] messages you
“The shapes come to 1,512 cropped ha, 108 less than we had. Paddock 3 lost 22 ha, 10 lost 17 and Back flat 12. Does 3’s new shape leave out the swamp corner? If so it’s right.”
7:14am+3 min
You reply
“Yep, the swamp’s never been cropped. 10 has the old house block cut out too.”
7:14am+10 sec
Yield forecaster works on it · 2 steps
Reworked the tonnes on the mapped areas
forecast.build_scenarioswheat 2,480 t down to 2,330 t; barley 1,150 t down to 1,090 t, at this month’s t/ha- Wheat priced 1,600 t: 69% of expected, was 65%
7:14am+2 sec
[AGENT NAME] asks for your yes
“On the mapped areas wheat comes to about 2,330 t, so the 1,600 t you’ve priced is 69% of it, not 65%. Barley’s about 1,090 t. Put that in this month’s report and give the grain marketer the new tonnes?”
7:17am+3 min
You approve
“Yes, send it to him.”
7:17am+8 sec
→ Grain marketer picks it up
Expected wheat now 2,330 t and barley 1,090 t on mapped areas; 69% of the wheat priced
reports.drafttonnes on mapped areas, [month]
7:17am+3 sec
Yield forecaster Done
Areas and tonnes reworked paddock by paddock; wheat priced share now 69%; the grain marketer has the new tonnes for the marketing plan
An example with made-up data. Names and figures in [brackets] are placeholders.
The agent behind it
Yield forecasterCroppingThe Yield forecaster estimates yield from rainfall, soil water and crop checks, and updates it through the season.
What it won’t do
- Promise a yield
- Sell or price grain
- Give a number without saying what it’s based on
More jobs the Yield forecaster does.
- Update the yield estimate after a good rainDaily
- A monthly yield range from spring onScheduled
- Re-estimate yield after a frost at floweringDaily
- Turn your head counts into a yield estimate before harvestOn demand
- Send harvest tonnes by paddock to plan bins and trucksScheduled
- Flag a paddock falling behind the rest on satelliteDaily
The farm software this job works from
Put [AGENT NAME] to work on your farm.
We’re taking a small number of pilot farms in Australia. Start with one or two agents and add more as you go.
See it on a farm like yours.
30 minutes with Thomas, our founder, on records like your own.
Livestock, paddocks, visitors and tanks, in one place.
The farm management software comes with every plan. Keep the software you already use, or use ours.
Not ready yet? Start with a free calculator.
The sums you do every week, for stock, pasture, crops and the books. No sign-up.
Watch a job before you commit.
Pick a playbook and see it play out, step by step.

