Watch hay baled too wet for heating in the shed
Hay baled too wet can heat and catch fire in the shed weeks after baling, taking the shed, the machinery in it and the winter’s feed. Nobody probes the stack because everyone has moved on to the next job.
The Hay and silage planner flags the stack, sets daily temperature checks for the risky weeks and tracks the readings so a heating stack is caught before it fires.
- When · Daily
- Bales are logged at a moisture reading above the safe stacking level
- You get
- The stack flagged with its moisture readings; daily probe check jobs; alert if temperatures climb
- Approval level
- Act with approval. Prepares it fully. You tap yes. You can change it.
What it reads
- Bale log: paddock, date, count, moisture readings at baling
- Shed and stack location
- Probe temperature readings sent in each day
What you get
- A flag on the stack with its baling moisture
- Daily probe check jobs for the next six weeks
- An urgent alert if readings climb past the danger level you set
When it stops and asks you
- A probe reading jumps sharply in one day
- Readings stop coming in
- The wet bales are mixed through a stack with dry ones
How often
Whenever bales go in above safe moisture, a few times a season
Who uses it
OwnersManagersFarm staff
On other farms
- Horses: Hay that has heated can go mouldy and dusty even if it never fires, so it flags those bales as unsuitable for horses.
What it uses
SMS and voice notes
Text the team, send a voice note or a photo, or forward a message. There’s no new app to learn.
Water monitors and weather stations
Trough, tank and rain gauge readings would start jobs for the team.
The last one makes it better, but it works without it.
Nothing official leaves the farm without your yes.This job runs at Act with approval: prepares it fully. You tap yes. You can change that any time.
The conversation
How the job plays out, step by step.
Hay and silage planner
Started 5:40am · Daily
- Start to done
- 8 min
- Agent actions
- 4
- Needed you
- 2×
[AGENT NAME]For the Hay and silage plannerDaily check · 5:40am
Bale log for Hill paddock lucerne shows 3 of 5 readings at 21 to 23% moisture

Hill paddock lucerne went in at up to 23% moisture, above the 18% you set for stacking. It’s in the main shed next to the header. I’d probe the stack daily for six weeks. Set that up for [staff]?
[AGENT NAME] · 5:40am
Yes, set it for [staff], every morning.
You · 5:42am

Hay and silage planner
Created daily probe jobs and set the alert level
Day 9. 48 at the front, 61 in the middle row.
Staff · 5:47am

Hay and silage planner
Logged the readings and compared with the last three days

The middle row has gone from 52 to 61 °C in 3 days and is still climbing. That’s the pattern you asked me to flag. Worth getting the header out of that shed and calling [fire brigade] for advice before anyone pulls bales out.
[AGENT NAME] · 5:47am
Done · 5:47am3 saved
- A flag on the stack with its baling moistureSaved
- Daily probe check jobs for the next six weeksSaved
- An urgent alert if readings climb past the danger level you setSaved
Behind the scenes
5:40am
Trigger Daily check
Bale log for Hill paddock lucerne shows 3 of 5 readings at 21 to 23% moisture
records.searchbale log [date], 640 small squares
5:40am+2 sec
[AGENT NAME] asks for your yes
“Hill paddock lucerne went in at up to 23% moisture, above the 18% you set for stacking. It’s in the main shed next to the header. I’d probe the stack daily for six weeks. Set that up for [staff]?”
5:42am+3 min
You approve
“Yes, set it for [staff], every morning.”
5:42am+10 sec
Hay and silage planner works on it · 2 steps
Created daily probe jobs and set the alert level
jobs.createprobe Hill stack, daily, 6 weeksmemory.rememberalert above [temperature]
5:47am+5 min
Staff replies
“Day 9. 48 at the front, 61 in the middle row.”
5:47am+10 sec
Hay and silage planner works on it · 2 steps
Logged the readings and compared with the last three days
records.createprobe readings- Middle row up from 52 to 61 over 3 days
5:47am+2 sec
[AGENT NAME] messages you
“The middle row has gone from 52 to 61 °C in 3 days and is still climbing. That’s the pattern you asked me to flag. Worth getting the header out of that shed and calling [fire brigade] for advice before anyone pulls bales out.”
5:47am+3 sec
Hay and silage planner Done
Stack flagged as heating; readings logged daily; trend sent to you to pass on to the owner and manager
An example with made-up data. Names and figures in [brackets] are placeholders.
The agent behind it
Hay and silage plannerCroppingThe Hay and silage planner finds the cutting windows from the forecast, and keeps bale counts and feed tests by paddock and cut.
What it won’t do
- Book a contractor without asking first
- Promise a dry window the forecast doesn’t show
- Make up bale counts
More jobs the Hay and silage planner does.
- Find a dry window to cut the lucerneDaily
- Log the bales off a paddock and its feed testOn demand
- Warn when rain is coming onto hay on the groundDaily
- Work out how many tonnes are in the silage pitOn demand
- Line up the silage contractor before the paddocks are readyScheduled
- Check a paddock’s spray withholding before it’s cut for hayDaily
Put [AGENT NAME] to work on your farm.
We’re taking a small number of pilot farms in [REGION]. Start with one or two agents and add more as you go.
See it on a farm like yours.
30 minutes with Thomas, our founder, on records like your own.
Livestock, paddocks, visitors and tanks, in one place.
The farm management software comes with every plan. Keep the software you already use, or use ours.
Not ready yet? Start with a free calculator.
The sums you do every week, for stock, pasture, crops and the books. No sign-up.
Watch a job before you commit.
Pick a playbook and see it play out, step by step.


