Work out how many tonnes are in the silage pit
A guess at what’s in the pit sets how long the feed lasts through winter. A wrong guess by 100 t either has you buying hay at the worst time or carrying silage you didn’t need to make.
The Hay and silage planner works out the volume and likely tonnes of silage from the pit or stack measurements and the feed test, then updates feed on hand.
- When · On demand
- “Pit’s 40 m long, 9 m wide, about 2.2 m high. How much is in it?”
- You get
- Volume in cubic metres; tonnes as fed and dry matter, with the density assumption stated; feed on hand updated
- Approval level
- Act with approval. Prepares it fully. You tap yes. You can change it.
What it reads
- Measurements from the farmer: length, width, height, wall shape
- Feed test: dry matter percentage
- Records of loads carted into the pit at harvest
What you get
- Pit volume and tonnes as fed
- Tonnes of dry matter, using the feed test
- Feed on hand updated so the feed budget uses the new figure
When it stops and asks you
- The stack is a drive-over pile and the sides aren’t straight
- No feed test is on file for that pit
- The tonnes are well off the loads carted in at making
How often
After each pit or stack is made, and again when it’s opened
Who uses it
OwnersManagersFarm staff
On other farms
- Feedlots: Feedlots also record the tonnes fed out each day, so it tracks the face moving back against the starting tonnes.
What it uses
SMS and voice notes
Text the team, send a voice note or a photo, or forward a message. There’s no new app to learn.
Photos, PDFs and spreadsheets
Send in scale exports, scan results, soil tests, old spreadsheets or a photo of the shed whiteboard, and they become records.
The last one makes it better, but it works without it.
Nothing official leaves the farm without your yes.This job runs at Act with approval: prepares it fully. You tap yes. You can change that any time.
The conversation
How the job plays out, step by step.
Hay and silage planner
Started 7:12am · On demand
- Start to done
- 6 min
- Agent actions
- 5
- Needed you
- 3×
[AGENT NAME]For the Hay and silage plannerPit’s 40 m long, 9 m wide, about 2.2 m high. How much is in it?
You · 7:12am

Is that the bunker by the dairy with the concrete walls, or the drive-over stack in the bottom paddock?
[AGENT NAME] · 7:12am
Bunker by the dairy. Ryegrass from October.
You · 7:14am

Hay and silage planner
Worked out the volume and tonnes from the measurements and the October feed test

About 792 m³. At a typical rolled density that’s roughly [tonnes] t as fed, or [tonnes] t of dry matter at 34% DM. Carting records had 61 loads in, which is in the same ballpark. Put it on feed on hand?
[AGENT NAME] · 7:14am
Yep.
You · 7:17am

Hay and silage planner
Updated feed on hand and noted the density used
Done · 7:17am3 saved
- Pit volume and tonnes as fedSaved
- Tonnes of dry matter, using the feed testSaved
- Feed on hand updated so the feed budget uses the new figureSaved
Behind the scenes
7:12am
You ask
“Pit’s 40 m long, 9 m wide, about 2.2 m high. How much is in it?”
7:12am+2 sec
[AGENT NAME] messages you
“Is that the bunker by the dairy with the concrete walls, or the drive-over stack in the bottom paddock?”
7:14am+3 min
You reply
“Bunker by the dairy. Ryegrass from October.”
7:14am+13 sec
Hay and silage planner works on it · 3 steps
Worked out the volume and tonnes from the measurements and the October feed test
- 792 m³
- Feed test [date]: 34% DM
- Density assumption [density] for well-rolled bunker silage
7:14am+2 sec
[AGENT NAME] asks for your yes
“About 792 m³. At a typical rolled density that’s roughly [tonnes] t as fed, or [tonnes] t of dry matter at 34% DM. Carting records had 61 loads in, which is in the same ballpark. Put it on feed on hand?”
7:17am+3 min
You approve
“Yep.”
7:17am+10 sec
Hay and silage planner works on it · 2 steps
Updated feed on hand and noted the density used
inventory.updateDairy bunker, ryegrass silagememory.rememberdensity assumption for this pit
7:17am+3 sec
Hay and silage planner Done
Dairy bunker recorded with volume, tonnes as fed and dry matter; feed planner’s budget now uses the new figure
An example with made-up data. Names and figures in [brackets] are placeholders.
The agent behind it
Hay and silage plannerCroppingThe Hay and silage planner finds the cutting windows from the forecast, and keeps bale counts and feed tests by paddock and cut.
What it won’t do
- Book a contractor without asking first
- Promise a dry window the forecast doesn’t show
- Make up bale counts
More jobs the Hay and silage planner does.
- Find a dry window to cut the lucerneDaily
- Log the bales off a paddock and its feed testOn demand
- Warn when rain is coming onto hay on the groundDaily
- Line up the silage contractor before the paddocks are readyScheduled
- Watch hay baled too wet for heating in the shedDaily
- Check a paddock’s spray withholding before it’s cut for hayDaily
Put [AGENT NAME] to work on your farm.
We’re taking a small number of pilot farms in [REGION]. Start with one or two agents and add more as you go.
See it on a farm like yours.
30 minutes with Thomas, our founder, on records like your own.
Livestock, paddocks, visitors and tanks, in one place.
The farm management software comes with every plan. Keep the software you already use, or use ours.
Not ready yet? Start with a free calculator.
The sums you do every week, for stock, pasture, crops and the books. No sign-up.
Watch a job before you commit.
Pick a playbook and see it play out, step by step.


