Skip to content
Agentic Ag

Calculators & toolsCrops, spraying and horticulture

Grain moisture and drying calculator

Enter the tonnes and their moisture. Get the weight after drying to the target moisture, the water removed and the shrink.

Sets the usual receival moisture.

Check the receival standard for your grade.

Weight at 12.5%

97.14 t

100 t at 15% moisture, dried to 12.5%

Water removed
2.86 t
Shrink
2.86%
Weight value lost
$1,000
dried grain worth $34,000

Rather not work this out each time?The team can keep track of it for you, from your own records.

See it in a demo

General guidance only. The answer is an estimate from the figures you enter, so check it against your own records and advice.

How it’s worked out

  • Dried weight = weight × (100 − moisture now) ÷ (100 − target moisture). The dry matter stays the same and only water comes off.
  • Shrink % = water removed ÷ starting weight × 100. Each point of moisture is a bit more than 1% of the weight.
  • Drying costs fuel and time but can save a downgrade or rejection, so weigh the value lost against the discount for wet grain.

Where to next

Three ways to see if it suits your farm.

Start with whichever feels right.

Or book a 30-minute demo
  1. 1Read

    Get the free report

    Getting started with AI. Where AI earns its keep on a farm, and a 90-day plan to start small.

  2. 2Watch

    See a job, step by step

    Pick a job from the library and see what sets it off, who does it and what you end up with.

  3. 3Try

    Put it on your own records

    We’re taking a small number of pilot farms in [REGION]. Start with one or two agents.

Book a demoJoin the pilot