Skip to content
Agentic Ag

Calculators & toolsCrops, spraying and horticulture

Irrigation scheduling calculator

Enter the reference evapotranspiration (ETo, the water a reference crop loses each day), the crop coefficient (Kc) and the soil’s readily available water. Get the crop’s daily water use, when to irrigate next and how much.

Sets the default crop coefficient.

A typical figure. It changes with stage and canopy.

Reference evapotranspiration, from the Bureau of Meteorology or the SILO climate database.

Set by soil type and root depth. Often 20–60 mm.

Often 85–90% for drip, lower for flood.

Irrigate next

In 4.5 days

6 mm a day of crop water use, 13 mm of 40 mm used

Apply
47.1 mm
40 mm to the root zone at 85%
Water for the area
9.41 ML
over 20 ha
Cycle
6.7 days
between irrigations with no rain

Rather not work this out each time?The team can keep track of it for you, from your own records.

See it in a demo

General guidance only. Check the schedule against soil moisture readings and talk to your agronomist or irrigation advisor.

How it’s worked out

  • Crop water use (ETc, mm a day) = ETo × crop coefficient (Kc).
  • Water used since the soil was refilled = ETc × days − effective rain. Days left = (readily available water − water used) ÷ ETc.
  • Apply = readily available water ÷ application efficiency. ML = mm × ha ÷ 100.
  • Check against soil moisture probes where you have them, since Kc and effective rain are estimates.

Where to next

Three ways to see if it suits your farm.

Start with whichever feels right.

Or book a 30-minute demo
  1. 1Read

    Get the free report

    Getting started with AI. Where AI earns its keep on a farm, and a 90-day plan to start small.

  2. 2Watch

    See a job, step by step

    Pick a job from the library and see what sets it off, who does it and what you end up with.

  3. 3Try

    Put it on your own records

    We’re taking a small number of pilot farms in [REGION]. Start with one or two agents.

Book a demoJoin the pilot