Spot a block that got more water than planned
A valve that sticks open or a shift left running overnight puts water below the roots, leaches nutrients and burns allocation. Without comparing applied to planned, nobody knows until the water account is short.
The Irrigation scheduler compares planned against applied water by block, uses the probes to check where the extra went and flags the likely cause, such as a valve left open or a long shift.
- When · Daily
- Logged watering, or the probe readings you send, show a block got well over its planned mm
- You get
- Planned against applied by block; the extra ML; likely cause; next watering for that block pushed back
- Approval level
- Act with approval. Prepares it fully. You tap yes. You can change it.
- Useful for
- Orchards and vinesIrrigated cropsDairy
What it reads
- The watering plan by block
- Logged run hours or flow meter readings
- Probe readings you send, at each depth before and after
- Valve and controller faults on the job list
What you get
- A flag with the block, the planned and applied mm, and the extra ML
- Whether the probes show water going past the root zone
- A pushed-back next watering and a check job for the valve
When it stops and asks you
- The flow meter and logged hours disagree
- The block was watered on purpose for frost or salt flushing
- Two blocks share a valve
How often
A few times a season
Who uses it
ManagersFarm staff
What it uses
Water monitors and weather stations
Trough, tank and rain gauge readings would start jobs for the team.
SMS and voice notes
Text the team, send a voice note or a photo, or forward a message. There’s no new app to learn.
The last one makes it better, but it works without it.
Nothing official leaves the farm without your yes.This job runs at Act with approval: prepares it fully. You tap yes. You can change that any time.
The conversation
How the job plays out, step by step.
Irrigation scheduler
Started 5:40am · Daily
- Start to done
- 6 min
- Agent actions
- 5
- Needed you
- 2×
[AGENT NAME]For the Irrigation schedulerDaily check · 5:40am
The probe export you sent this morning shows Block 8 up overnight at 80 cm; Block 8 wasn’t on last night’s plan

Irrigation scheduler
Checked last night’s plan and the run log

Block 8 got water last night though it wasn’t on the plan. Its probes rose from 11 pm at all three depths, so it’s down to 80 cm. Block 7 shares a manifold. Looks like Block 8’s valve opened with 7. Roughly 18 ML extra.
[AGENT NAME] · 5:40am
That solenoid’s been playing up. Get Dave on it.
You · 5:42am

I’ll raise a job for Dave on the Block 8 solenoid, and push Block 8’s next watering from Tuesday to Friday. OK?
[AGENT NAME] · 5:42am
Yep.
You · 5:45am

Irrigation scheduler
Raised the job and moved the watering
Done · 5:45am3 saved
- A flag with the block, the planned and applied mm, and the extra MLSaved
- Whether the probes show water going past the root zoneSaved
- A pushed-back next watering and a check job for the valveSaved
Behind the scenes
5:40am
Trigger Daily check
The probe export you sent this morning shows Block 8 up overnight at 80 cm; Block 8 wasn’t on last night’s plan
probes.readBlock 8, 30, 60 and 80 cm rising from 11 pm
5:40am+13 sec
Irrigation scheduler works on it · 3 steps
Checked last night’s plan and the run log
- Plan: Blocks 7 and 9, 8 hours
- Run log: Block 7 valve on, Block 8 valve not on the log
records.search
5:40am+2 sec
[AGENT NAME] messages you
“Block 8 got water last night though it wasn’t on the plan. Its probes rose from 11 pm at all three depths, so it’s down to 80 cm. Block 7 shares a manifold. Looks like Block 8’s valve opened with 7. Roughly 18 ML extra.”
5:42am+3 min
You reply
“That solenoid’s been playing up. Get Dave on it.”
5:42am+2 sec
[AGENT NAME] asks for your yes
“I’ll raise a job for Dave on the Block 8 solenoid, and push Block 8’s next watering from Tuesday to Friday. OK?”
5:45am+3 min
You approve
“Yep.”
5:45am+10 sec
Irrigation scheduler works on it · 2 steps
Raised the job and moved the watering
jobs.createBlock 8 solenoidrecords.create18 ML unplanned, Block 8
5:45am+3 sec
Irrigation scheduler Done
Solenoid job raised for Dave; Block 8 next watering moved to Friday; unplanned 18 ML logged against the block
An example with made-up data. Names and figures in [brackets] are placeholders.
The agent behind it
Irrigation schedulerIrrigation & waterThe Irrigation scheduler turns soil moisture and evapotranspiration into when and how much to water, block by block.
What it won’t do
- Start or stop pumps
- Water over a block’s allocation without telling you
- Make up a probe reading
More jobs the Irrigation scheduler does.
Put [AGENT NAME] to work on your farm.
We’re taking a small number of pilot farms in [REGION]. Start with one or two agents and add more as you go.
See it on a farm like yours.
30 minutes with Thomas, our founder, on records like your own.
Livestock, paddocks, visitors and tanks, in one place.
The farm management software comes with every plan. Keep the software you already use, or use ours.
Not ready yet? Start with a free calculator.
The sums you do every week, for stock, pasture, crops and the books. No sign-up.
Watch a job before you commit.
Pick a playbook and see it play out, step by step.


