Draft next week’s watering schedule block by block
The schedule is often last week’s plus a guess. Working it out from evapotranspiration and crop factor for twelve blocks every week is the kind of sum that gets skipped, and it’s where water and power get wasted.
The Irrigation scheduler works out each block’s water need for next week from reference evapotranspiration, the crop factor at its stage and soil moisture and drafts a run schedule that fits the pumps and off-peak hours.
- When · Scheduled
- Every Friday afternoon in the irrigation season
- You get
- Next week’s schedule by block: nights, hours, mm; total ML for the week; blocks with no probe data flagged
- Approval level
- Act with approval. Prepares it fully. You tap yes. You can change it.
- Useful for
- Orchards and vinesIrrigated cropsDairy
What it reads
- Forecast reference evapotranspiration for next week
- Crop factor by block at its current stage
- The probe readings you send, and refill points
- Dripper rate, block area and pump capacity
- Off-peak power hours
What you get
- Hours to run each block, by night
- Expected mm and ML per block and in total
- Flags on blocks with no recent probe reading
When it stops and asks you
- A block’s crop stage isn’t clear, such as after harvest
- The schedule doesn’t fit inside off-peak hours
- A probe reading looks wrong
How often
Weekly through the irrigation season
Who uses it
ManagersFarm staff
What it uses
Weather forecast
The team uses the forecast to find spray windows, warn you about heat and frost, and plan for dry spells.
Water monitors and weather stations
Trough, tank and rain gauge readings would start jobs for the team.
BOM weather stations
If we get access, readings from the nearest Bureau station would let you check your own gauge against them.
The last 2 make it better, but it works without them.
Nothing official leaves the farm without your yes.This job runs at Act with approval: prepares it fully. You tap yes. You can change that any time.
The conversation
How the job plays out, step by step.
Irrigation scheduler
Started 6:00am · Scheduled
- Start to done
- 6 min
- Agent actions
- 8
- Needed you
- 2×
[AGENT NAME]For the Irrigation schedulerOn schedule · 6:00am
Friday 3 pm: next week’s schedule due

Irrigation scheduler
Worked out the need for each block from next week’s forecast and crop factors

Irrigation scheduler
Fitted the runs to the pumps and off-peak window

Next week’s schedule is drafted: 12 blocks, 4 nights, 214 ML, all inside off-peak. Blocks 1 to 4 need the most, 22 to 26 mm. Block 10 has no probe reading since Tuesday, so I’ve used Block 11 next door. Check it?
[AGENT NAME] · 6:00am
Fine. Block 6 is finished picking, drop it back.
You · 6:02am

Irrigation scheduler
Set Block 6 to post-harvest crop factor and redid it

Block 6 is down to 9 mm, total 205 ML. Put it on the irrigator’s job list for Monday?
[AGENT NAME] · 6:03am
Yep.
You · 6:05am
Done · 6:05am3 saved
- Hours to run each block, by nightSaved
- Expected mm and ML per block and in totalSaved
- Flags on blocks with no recent probe readingSaved
Behind the scenes
6:00am
Trigger On schedule
Friday 3 pm: next week’s schedule due
records.searchblock list
6:00am+13 sec
Irrigation scheduler works on it · 3 steps
Worked out the need for each block from next week’s forecast and crop factors
forecast.readETo 38 mm for the week- Kc 0.6 to 0.95 by block
probes.read12 blocks from the export you sent, nothing from Block 10 since Tuesday
6:00am+13 sec
Irrigation scheduler works on it · 3 steps
Fitted the runs to the pumps and off-peak window
- Pump runs 4 blocks at once
- Off-peak 10 pm to 7 am
plans.draft
6:00am+2 sec
[AGENT NAME] messages you
“Next week’s schedule is drafted: 12 blocks, 4 nights, 214 ML, all inside off-peak. Blocks 1 to 4 need the most, 22 to 26 mm. Block 10 has no probe reading since Tuesday, so I’ve used Block 11 next door. Check it?”
6:02am+3 min
You reply
“Fine. Block 6 is finished picking, drop it back.”
6:03am+10 sec
Irrigation scheduler works on it · 2 steps
Set Block 6 to post-harvest crop factor and redid it
- Block 6 from 16 mm to 9 mm
- Total 205 ML
6:03am+2 sec
[AGENT NAME] asks for your yes
“Block 6 is down to 9 mm, total 205 ML. Put it on the irrigator’s job list for Monday?”
6:05am+3 min
You approve
“Yep.”
6:05am+3 sec
Irrigation scheduler Done
Next week’s schedule on the irrigator’s list; Block 10 probe job raised; Block 6 marked post-harvest
An example with made-up data. Names and figures in [brackets] are placeholders.
The agent behind it
Irrigation schedulerIrrigation & waterThe Irrigation scheduler turns soil moisture and evapotranspiration into when and how much to water, block by block.
What it won’t do
- Start or stop pumps
- Water over a block’s allocation without telling you
- Make up a probe reading
More jobs the Irrigation scheduler does.
Put [AGENT NAME] to work on your farm.
We’re taking a small number of pilot farms in [REGION]. Start with one or two agents and add more as you go.
See it on a farm like yours.
30 minutes with Thomas, our founder, on records like your own.
Livestock, paddocks, visitors and tanks, in one place.
The farm management software comes with every plan. Keep the software you already use, or use ours.
Not ready yet? Start with a free calculator.
The sums you do every week, for stock, pasture, crops and the books. No sign-up.
Watch a job before you commit.
Pick a playbook and see it play out, step by step.


