Water only the blocks the storm missed
A storm drops 20 mm on one end of the farm and 4 mm on the other. Go by the house gauge and the dry blocks get skipped in the heat; go by habit and the wet blocks get watered and the water’s wasted.
The Irrigation scheduler reads each block’s own rain gauge instead of the house gauge, puts it with the probe readings you send and the forecast, and cuts tonight’s watering to the blocks that still need it and after your yes.
- When · On demand
- “Big storm went through last night. Do we still water tonight?”
- You get
- Rain on each block from its own gauge; which blocks can wait and till when; tonight’s watering job for just the dry blocks
- Approval level
- Act with approval. Prepares it fully. You tap yes. You can change it.
- Useful for
- Orchards and vinesMarket gardens
What it reads
- Monitoring: the rain gauge on each block, last 24 hours
- Probe readings you send this morning, by block
- This week’s watering plan: Blocks 3 to 7 tonight, 10 hours each
- Forecast: next 6 days
What you get
- Rain on each block from its own gauge
- Which blocks can skip tonight, and when they’ll need water again
- Tonight’s watering job for just the dry blocks
- This morning’s probe readings saved against each block
When it stops and asks you
- A block’s gauge didn’t report overnight
- The probe and the gauge tell different stories on a block
- Hot, windy days in the forecast would bring the wet blocks forward
How often
After summer storms, a few times a season
Who uses it
ManagersFarm staffOwners
What it uses
SMS and voice notes
Text the team, send a voice note or a photo, or forward a message. There’s no new app to learn.
Nothing official leaves the farm without your yes.This job runs at Act with approval: prepares it fully. You tap yes. You can change that any time.
The conversation
How the job plays out, step by step.
Irrigation scheduler
Started 7:12am · On demand
- Start to done
- 5 min
- Agent actions
- 4
- Needed you
- 3×
[AGENT NAME]For the Irrigation schedulerBig storm went through last night. Do we still water tonight?
You · 7:12am

Irrigation scheduler
Read each block’s gauge and the forecast

The storm missed the bottom end. Blocks 3 to 5 got 21 mm, Block 6 got 9 and Block 7 only 4, even though the house gauge says 26. What are the probes saying?
[AGENT NAME] · 7:12am
3 and 5 are wet at 40 cm. 6 is halfway. 7 is near refill at 40.
You · 7:14am

Then skip 3 to 5 tonight, they’ll keep till about Thursday with the heat coming. Water 6 for 6 hours and 7 for the full 10. I’ll put that on [irrigator]’s list for tonight and save this morning’s probe readings. OK?
[AGENT NAME] · 7:14am
Yep, go.
You · 7:17am

Irrigation scheduler
Saved the probe readings and put tonight’s watering on the list
Done · 7:17am4 saved
- Rain on each block from its own gaugeSaved
- Which blocks can skip tonight, and when they’ll need water againSaved
- Tonight’s watering job for just the dry blocksSaved
- This morning’s probe readings saved against each blockSaved
Behind the scenes
7:12am
You ask
“Big storm went through last night. Do we still water tonight?”
7:12am+10 sec
Irrigation scheduler works on it · 2 steps
Read each block’s gauge and the forecast
- Sensors: house gauge 26 mm, Blocks 3 to 5 gauge 21 mm, Block 6 gauge 9 mm, Block 7 gauge 4 mm
forecast.readdry for 6 days, 34 °C Thursday
7:12am+2 sec
[AGENT NAME] messages you
“The storm missed the bottom end. Blocks 3 to 5 got 21 mm, Block 6 got 9 and Block 7 only 4, even though the house gauge says 26. What are the probes saying?”
7:14am+3 min
You reply
“3 and 5 are wet at 40 cm. 6 is halfway. 7 is near refill at 40.”
7:14am+2 sec
[AGENT NAME] asks for your yes
“Then skip 3 to 5 tonight, they’ll keep till about Thursday with the heat coming. Water 6 for 6 hours and 7 for the full 10. I’ll put that on [irrigator]’s list for tonight and save this morning’s probe readings. OK?”
7:17am+3 min
You approve
“Yep, go.”
7:17am+10 sec
Irrigation scheduler works on it · 2 steps
Saved the probe readings and put tonight’s watering on the list
records.log_readingprobes at 40 cm, Blocks 3, 5, 6 and 7, as sent this morningjobs.createWater Block 6 for 6 hours and Block 7 for 10 hours, tonight, [irrigator]
7:17am+3 sec
Irrigation scheduler Done
Tonight’s watering down to Blocks 6 and 7; Blocks 3 to 5 moved to Thursday in this week’s plan; the gauge and probe readings kept with it
plans.draftThis week’s watering, after the storm
An example with made-up data. Names and figures in [brackets] are placeholders.
The agent behind it
Irrigation schedulerIrrigation & waterThe Irrigation scheduler turns soil moisture and evapotranspiration into when and how much to water, block by block.
What it won’t do
- Start or stop pumps
- Water over a block’s allocation without telling you
- Make up a probe reading
More jobs the Irrigation scheduler does.
The farm software this job works from
Put [AGENT NAME] to work on your farm.
We’re taking a small number of pilot farms in Australia. Start with one or two agents and add more as you go.
See it on a farm like yours.
30 minutes with Thomas, our founder, on records like your own.
Livestock, paddocks, visitors and tanks, in one place.
The farm management software comes with every plan. Keep the software you already use, or use ours.
Not ready yet? Start with a free calculator.
The sums you do every week, for stock, pasture, crops and the books. No sign-up.
Watch a job before you commit.
Pick a playbook and see it play out, step by step.


