Track coolroom temperatures through a power outage
When the power goes, the first instinct is to open doors and check, which lets the cold out. Afterwards the auditor or buyer wants to know how warm the fruit got and for how long, and nobody wrote it down.
The Cool chain watcher watches every room through the outage, works out how long each has before it leaves its range, tells you which rooms to keep shut and records the whole event for the QA file.
- When · Daily
- Once coolroom sensors are connected: they show fridge plant stopped and room temperatures climbing at the same time
- You get
- Live room-by-room temperatures; time left before each room goes out of range; an event record for QA
- Approval level
- Act with approval. Prepares it fully. You tap yes. You can change it.
- Useful for
- Orchards and vinesMarket gardensNursery
What it reads
- Coolroom temperature sensors, every room, once connected
- Fridge plant status and power supply
- Stock in each room and its temperature range
- Generator plan for the coolrooms, if there is one
What you get
- Updates on each room’s temperature through the outage
- How long each room has before it leaves range at the current rate of rise
- An event record with times and peak temperatures for the QA file
When it stops and asks you
- A room is going out of range and holds fruit for export
- The generator can only run some rooms
- The sensors themselves stop reporting
How often
A few times a year, mostly in summer storms
Who uses it
OwnersManagersFarm staff
What it uses
Water monitors and weather stations
Trough, tank and rain gauge readings would start jobs for the team.
SMS and voice notes
Text the team, send a voice note or a photo, or forward a message. There’s no new app to learn.
Wattwatchers
Power use on pumps and sheds would come in, so a pump that stops shows up as a job.
The last one makes it better, but it works without it.
Nothing official leaves the farm without your yes.This job runs at Act with approval: prepares it fully. You tap yes. You can change that any time.
The conversation
How the job plays out, step by step.
2 agents on it
Started 5:40am · Daily
- Start to done
- 6 min
- Agent actions
- 6
- Needed you
- 2×
[AGENT NAME]For the Cool chain watcherDaily check · 5:40am
Once sensors are connected: all four coolrooms show fridge plant off at 2:12 pm; rooms rising


Cool chain watcher → Fuel and power watcher
Asked whether it’s a grid outage or the coolroom supply

Cool chain watcher
Confirmed grid outage in the district and worked out rate of rise for each room

Power’s out across the district, restore estimate 5 pm. Rooms 1, 2 and 4 will hold range till about 7 pm if the doors stay shut. Room 3 (cherries, half full) will go over 4 °C around 3:30. Keep all doors closed.
[AGENT NAME] · 5:40am
Generator can run one room. Putting it on 3.
You · 5:42am

Cool chain watcher
Noted the generator start and kept reading the rooms every 10 minutes

Power’s back at 4:48 and no room went out of range. Save the event record to the QA folder?
[AGENT NAME] · 5:43am
Yes.
You · 5:45am
Done · 5:45am3 saved
- Updates on each room’s temperature through the outageSaved
- How long each room has before it leaves range at the current rate of riseSaved
- An event record with times and peak temperatures for the QA fileSaved
Behind the scenes
5:40am
Trigger Daily check
Once sensors are connected: all four coolrooms show fridge plant off at 2:12 pm; rooms rising
climate.readRooms 1 to 4
5:40am+6 sec
→ Fuel and power watcher picks it up
Asked whether it’s a grid outage or the coolroom supply
5:40am+13 sec
Cool chain watcher works on it · 3 steps
Confirmed grid outage in the district and worked out rate of rise for each room
- Network outage notice, restore estimate 5 pm
alerts.sendall staff- Room 1 rising 0.4 °C an hour, Room 3 1.1 °C an hour (half empty)
5:40am+2 sec
[AGENT NAME] messages you
“Power’s out across the district, restore estimate 5 pm. Rooms 1, 2 and 4 will hold range till about 7 pm if the doors stay shut. Room 3 (cherries, half full) will go over 4 °C around 3:30. Keep all doors closed.”
5:42am+3 min
You reply
“Generator can run one room. Putting it on 3.”
5:43am+10 sec
Cool chain watcher works on it · 2 steps
Noted the generator start and kept reading the rooms every 10 minutes
- Room 3 peak 3.6 °C at 3:05 then falling
- Power back 4:48 pm
5:43am+2 sec
[AGENT NAME] asks for your yes
“Power’s back at 4:48 and no room went out of range. Save the event record to the QA folder?”
5:45am+3 min
You approve
“Yes.”
5:45am+3 sec
Cool chain watcher Done
Outage event record saved: times, peak temperature per room, none out of range; filed in the QA folder; generator use noted for the power watcher
records.log_readinggenerator on Room 3, 2:40 pm
An example with made-up data. Names and figures in [brackets] are placeholders.
The agent behind it
Cool chain watcherHorticulture & packhouseThe Cool chain watcher keeps an eye on coolroom, controlled-atmosphere and dispatch temperatures.
What it won’t do
- Change coolroom settings
- Make up a reading
- Release fruit that broke the cool chain without telling you
More jobs the Cool chain watcher does.
- Wake someone when a coolroom drifts out of rangeDaily
- A weekly cool chain record for the QA fileScheduled
- Check pulp temperatures before the truck leavesOn demand
- Spot a coolroom whose fridge plant is working harderDaily
- Check the controlled-atmosphere rooms every morningScheduled
- Fill a gap in the coolroom log before the fruit in it shipsDaily
Put [AGENT NAME] to work on your farm.
We’re taking a small number of pilot farms in [REGION]. Start with one or two agents and add more as you go.
See it on a farm like yours.
30 minutes with Thomas, our founder, on records like your own.
Livestock, paddocks, visitors and tanks, in one place.
The farm management software comes with every plan. Keep the software you already use, or use ours.
Not ready yet? Start with a free calculator.
The sums you do every week, for stock, pasture, crops and the books. No sign-up.
Watch a job before you commit.
Pick a playbook and see it play out, step by step.

