Check pulp temperatures before the truck leaves
A warm pallet loaded with the rest can be the one the buyer’s distribution centre (DC) probes, and then the whole load is questioned. A dispatch temperature written down at loading is also the best defence if a rejection comes later.
The Cool chain watcher logs the pulp temperatures against each pallet on the load, checks them against the buyer’s spec and flags any pallet that shouldn’t go.
- When · On demand
- “Pulp temps for the Melbourne truck: 2.1, 2.4, 3.8, 2.2”
- You get
- Pulp temps logged by pallet; pass or flag against spec; the dispatch temperature record for the load
- Approval level
- Act with approval. Prepares it fully. You tap yes. You can change it.
What it reads
- Pulp temperatures sent from the dock
- Pallets on the load and their room
- The buyer’s dispatch temperature spec
- How long each pallet has been out of the room
What you get
- A pulp temperature logged against each pallet
- A flag on any pallet above spec, with its room and time out
- The dispatch temperature record for the load, filed
When it stops and asks you
- The readings don’t line up with the number of pallets
- A pallet is over spec and the truck can’t wait
- The buyer’s spec isn’t on file
How often
Every truck in the season
Who uses it
ManagersFarm staff
What it uses
SMS and voice notes
Text the team, send a voice note or a photo, or forward a message. There’s no new app to learn.
Water monitors and weather stations
Trough, tank and rain gauge readings would start jobs for the team.
Photos, PDFs and spreadsheets
Send in scale exports, scan results, soil tests, old spreadsheets or a photo of the shed whiteboard, and they become records.
The last 2 make it better, but it works without them.
Nothing official leaves the farm without your yes.This job runs at Act with approval: prepares it fully. You tap yes. You can change that any time.
The conversation
How the job plays out, step by step.
Cool chain watcher
Started 7:12am · On demand
- Start to done
- 13 min
- Agent actions
- 2
- Needed you
- 4×
[AGENT NAME]For the Cool chain watcherPulp temps for the Melbourne truck: 2.1, 2.4, 3.8, 2.2
Staff · 7:12am

Cool chain watcher
Matched the readings to the four pallets in loading order and checked the spec

Three are fine. Pallet 5122 is at 3.8 °C, over [buyer]’s 3 °C. It came out of Room 2 at 3:10, so it’s been on the dock 50 minutes. Hold it back and send the other three?
[AGENT NAME] · 7:12am
Driver says he can wait 40 minutes.
Staff · 7:17am

Put 5122 back in Room 2 and re-probe in 30 minutes. If it’s at 3 or under, it goes. If not, send three and I’ll note it short. I’ll log the temps for the load either way. OK?
[AGENT NAME] · 7:17am
Yep, do that.
You · 7:19am
5122 now 2.7.
Staff · 7:24am
Done · 7:24am3 saved
- A pulp temperature logged against each palletSaved
- A flag on any pallet above spec, with its room and time outSaved
- The dispatch temperature record for the load, filedSaved
Behind the scenes
7:12am
Staff asks
“Pulp temps for the Melbourne truck: 2.1, 2.4, 3.8, 2.2”
7:12am+10 sec
Cool chain watcher works on it · 2 steps
Matched the readings to the four pallets in loading order and checked the spec
- Pallets 5120 to 5123, plums
- Buyer spec: pulp at or under 3 °C at dispatch
7:12am+2 sec
[AGENT NAME] messages you
“Three are fine. Pallet 5122 is at 3.8 °C, over [buyer]’s 3 °C. It came out of Room 2 at 3:10, so it’s been on the dock 50 minutes. Hold it back and send the other three?”
7:17am+5 min
Staff replies
“Driver says he can wait 40 minutes.”
7:17am+2 sec
[AGENT NAME] asks for your yes
“Put 5122 back in Room 2 and re-probe in 30 minutes. If it’s at 3 or under, it goes. If not, send three and I’ll note it short. I’ll log the temps for the load either way. OK?”
7:19am+3 min
You approve
“Yep, do that.”
7:24am+5 min
Staff replies
“5122 now 2.7.”
7:24am+3 sec
Cool chain watcher Done
All four pallets logged with dispatch pulp temps, 5122 re-probed at 2.7 °C; load record filed; dock time noted for the floor supervisor
records.log_reading
An example with made-up data. Names and figures in [brackets] are placeholders.
The agent behind it
Cool chain watcherHorticulture & packhouseThe Cool chain watcher keeps an eye on coolroom, controlled-atmosphere and dispatch temperatures.
What it won’t do
- Change coolroom settings
- Make up a reading
- Release fruit that broke the cool chain without telling you
More jobs the Cool chain watcher does.
- Wake someone when a coolroom drifts out of rangeDaily
- A weekly cool chain record for the QA fileScheduled
- Track coolroom temperatures through a power outageDaily
- Spot a coolroom whose fridge plant is working harderDaily
- Check the controlled-atmosphere rooms every morningScheduled
- Fill a gap in the coolroom log before the fruit in it shipsDaily
Put [AGENT NAME] to work on your farm.
We’re taking a small number of pilot farms in [REGION]. Start with one or two agents and add more as you go.
See it on a farm like yours.
30 minutes with Thomas, our founder, on records like your own.
Livestock, paddocks, visitors and tanks, in one place.
The farm management software comes with every plan. Keep the software you already use, or use ours.
Not ready yet? Start with a free calculator.
The sums you do every week, for stock, pasture, crops and the books. No sign-up.
Watch a job before you commit.
Pick a playbook and see it play out, step by step.


