Skip to content
Agentic Ag

Sort out a tank sensor that disagrees with the dipstick

A tank sensor that reads high is worse than none: the app says six weeks of water and the house runs dry on a Sunday. Most of the time it’s a sensor that has slipped on its mount or a setting that’s off, not the tank.

The Infrastructure keeper turns the dip into a level from the tank’s height, looks back for when the sensor and the real level parted, saves the dip as a hand reading and puts a check on the sensor on the list.

When · On demand
“House tank says 82% on the app, but I just dipped it at 1.1 metres.”
You get
The dip as a level beside the sensor’s; when the sensor started reading wrong; your dip saved on the sensor’s history with the real days left; a job to check the sensor and its settings
Approval level
Act and tell. Does it and logs it. You hear about it after. You can change it.
Useful for
Small blocksBeefSheepHorsesDairy

What it reads

  • Sensor: House tank, readings over the last 30 days
  • The tank’s settings: litres, height when full and how high the sensor sits
  • Your dip: 1.1 m
  • The house tank’s usual fall a day

What you get

  • The dip turned into a level: 1.1 m of 2.4 m is about 46%
  • When the sensor and the real level parted, from its readings
  • Your dip saved on the sensor’s history, and the real days left until the sensor is fixed
  • A job to check the sensor’s mount and the tank’s settings

When it stops and asks you

  • The tank’s height when full isn’t set or looks wrong, since owners and managers change sensor settings
  • The dip and the sensor only disagree some of the time
  • The tank might be leaking as well as reading wrong

How often

Now and then; usually after a sensor is moved or replaced, or the tank is cleaned

Who uses it

OwnersManagersFarm staff

On other farms

  • Dairy: The dairy wash-down tank empties and refills every milking, so its readings are checked against milking times before the sensor is called wrong.

What it uses

Live

SMS and voice notes

Text the team, send a voice note or a photo, or forward a message. There’s no new app to learn.

Partner

Water monitors and weather stations

Trough, tank and rain gauge readings would start jobs for the team.

The last one makes it better, but it works without it.

Nothing official leaves the farm without your yes.This job runs at Act and tell: does it and logs it. You hear about it after. You can change that any time.

See the guardrails

The conversation

How the job plays out, step by step.

Infrastructure keeper

Started 7:12am · On demand

Start to done
3 min
Agent actions
9
Needed you
2×
[AGENT NAME]For the Infrastructure keeper

House tank says 82% on the app, but I just dipped it at 1.1 metres.

You · 7:12am

Infrastructure keeper

Turned the dip into a level and compared it with the sensor

Infrastructure keeper

Looked back for when the two parted

Infrastructure keeper

Saved your dip as a hand reading and put a check on the list

1.1 m in a 2.4 m tank is about 46%, around 10,300 L, so the sensor’s about 36 points high. It’s sat between 80 and 84% for 19 days, even through the weekend’s washing, so it’s likely stuck or slipped on its mount. Your dip’s saved, but the sensor will keep sending 82% until it’s fixed, so go by about 3 weeks of water, not 6. A sensor check is on the list.

[AGENT NAME] · 7:12am

Sensor’s slid down the pipe inside the tank. Sam’s tied it back up.

You · 7:15am

Infrastructure keeper

Closed the check with the fix and noted it for next time

Done · 7:15am1 waiting for you

  • The dip turned into a level: 1.1 m of 2.4 m is about 46%Saved
  • When the sensor and the real level parted, from its readingsSaved
  • Your dip saved on the sensor’s history, and the real days left until the sensor is fixedSaved
  • A job to check the sensor’s mount and the tank’s settingsWaiting for you

Behind the scenes

  1. 7:12am

    You ask

    “House tank says 82% on the app, but I just dipped it at 1.1 metres.”

  2. 7:12am+10 sec

    Infrastructure keeper works on it · 2 steps

    Turned the dip into a level and compared it with the sensor

    • sensors.read_waterHouse tank 82%; settings 2.4 m when full, 22,500 L
    • Dip of 1.1 m of 2.4 m: about 46%, around 10,300 L
  3. 7:12am+10 sec

    Infrastructure keeper works on it · 2 steps

    Looked back for when the two parted

    • sensors.read_waterHouse tank stuck between 80 and 84% for 19 days, with no fall after the weekend’s washing
    • Before that: a normal fall of about 2% a day
  4. 7:12am+10 sec

    Infrastructure keeper works on it · 2 steps

    Saved your dip as a hand reading and put a check on the list

    • records.createHouse tank, hand reading 46%, 1.1 m dip
    • jobs.createCheck the house tank sensor: mount, cable and the height-when-full setting, this week
  5. 7:12am+2 sec

    [AGENT NAME] messages you

    “1.1 m in a 2.4 m tank is about 46%, around 10,300 L, so the sensor’s about 36 points high. It’s sat between 80 and 84% for 19 days, even through the weekend’s washing, so it’s likely stuck or slipped on its mount. Your dip’s saved, but the sensor will keep sending 82% until it’s fixed, so go by about 3 weeks of water, not 6. A sensor check is on the list.”

  6. 7:15am+3 min

    You reply

    “Sensor’s slid down the pipe inside the tank. Sam’s tied it back up.”

  7. 7:15am+13 sec

    Infrastructure keeper works on it · 3 steps

    Closed the check with the fix and noted it for next time

    • jobs.updatehouse tank sensor check done, sensor had slipped down its pipe, tied back by Sam
    • sensors.read_waterHouse tank 46% at 4:10 pm
    • memory.rememberHouse tank sensor can slip on its pipe; check it after the tank is cleaned
  8. 7:15am+3 sec

    Infrastructure keeper Done

    House tank reading right again at 46%; your dip on its history; the slip noted so it’s checked first next time

An example with made-up data. Names and figures in [brackets] are placeholders.

The agent behind it

Infrastructure keeperOperations

The Infrastructure keeper looks after the fixed things: fences, yards, sheds, roads, tanks, bores and dams.

What it won’t do

  • Book a contractor without asking first
  • Sign off that a structure is safe
  • Close a repair job nobody has done

More jobs the Infrastructure keeper does.

The farm software this job works from

Put [AGENT NAME] to work on your farm.

We’re taking a small number of pilot farms in [REGION]. Start with one or two agents and add more as you go.

Pilot farms wanted

Want to try it out?

Join the pilot, or book a demo and we’ll walk you through this job on a farm like yours. You text the team from your phone. Some connections are still being built, and we’ll tell you which.

  • SMS and voice notes
  • Water monitors and weather stations
  • Nothing to install

Free report

Getting started with AI.

A free practical guide for Australian farms and agribusinesses

Where AI actually helps on a farm, what it needs from you, the risks to watch, and a 90-day plan to start small.

  • Where it actually helps
  • What it needs from you
  • Risks and guardrails
  • Working out the return
Book a demoJoin the pilot