Log a channel leak and raise the repair job
A leaking gate or a seeping bank can lose a steady trickle all season and soften the bank until it breaks. Leaks are mentioned at smoko and forgotten, then found again when the bank goes.
The Pump and channel watcher logs the leak on the channel map with the photo, estimates the water lost from the flow difference if you’ve sent meter readings from either side and raises a repair job.
- When · On demand
- “Channel’s leaking at the Block 4 gate. Photo attached.”
- You get
- Leak logged on the map; rough loss estimate; repair job raised with your yes
- Approval level
- Act with approval. Prepares it fully. You tap yes. You can change it.
- Useful for
- Irrigated cropsDairyOrchards and vines
What it reads
- Photo and location from the message
- Channel map with gates and banks
- Flow or level readings you’ve sent from either side of the gate
- Past repairs at the same spot
What you get
- The leak logged with photo and location
- A rough loss in ML per day if meters allow
- A repair job for the crew or contractor
When it stops and asks you
- The leak is on a supply channel the irrigation authority owns
- The bank looks like it could break
- A contractor would be needed
How often
A few times a season
Who uses it
ManagersFarm staff
What it uses
SMS and voice notes
Text the team, send a voice note or a photo, or forward a message. There’s no new app to learn.
Water monitors and weather stations
Trough, tank and rain gauge readings would start jobs for the team.
Photos, PDFs and spreadsheets
Send in scale exports, scan results, soil tests, old spreadsheets or a photo of the shed whiteboard, and they become records.
The last 2 make it better, but it works without them.
Nothing official leaves the farm without your yes.This job runs at Act with approval: prepares it fully. You tap yes. You can change that any time.
The conversation
How the job plays out, step by step.
Pump and channel watcher
Started 7:12am · On demand
- Start to done
- 6 min
- Agent actions
- 5
- Needed you
- 3×
[AGENT NAME]For the Pump and channel watcherChannel’s leaking at the Block 4 gate. Photo attached.
Staff · 7:12am

Pump and channel watcher
Read the photo and checked the meter readings you sent

Got it, Block 4 gate. The last meter readings you sent show about 2 ML a day not reaching the bay, so roughly that’s going out the gate. Same gate was repaired last March. It’s on your own channel. Want a repair job for the crew?
[AGENT NAME] · 7:12am
Yeah, new board and seal. Do it after this watering finishes Thursday.
You · 7:14am

I’ll log the leak and raise a job for Friday: replace board and seal at the Block 4 gate, noted as the second repair there. OK?
[AGENT NAME] · 7:14am
Yep.
You · 7:17am

Pump and channel watcher
Logged the leak and raised the job
Done · 7:17am3 saved
- The leak logged with photo and locationSaved
- A rough loss in ML per day if meters allowSaved
- A repair job for the crew or contractorSaved
Behind the scenes
7:12am
Staff asks
“Channel’s leaking at the Block 4 gate. Photo attached.”
7:12am+13 sec
Pump and channel watcher works on it · 3 steps
Read the photo and checked the meter readings you sent
- Leak under the board at the Block 4 gate, leak under the board
sensors.read_waterlast readings you sent, flow above gate 18 ML/day, Block 4 delivered 16 ML/day- Repaired at same gate [date] last year
7:12am+2 sec
[AGENT NAME] messages you
“Got it, Block 4 gate. The last meter readings you sent show about 2 ML a day not reaching the bay, so roughly that’s going out the gate. Same gate was repaired last March. It’s on your own channel. Want a repair job for the crew?”
7:14am+3 min
You reply
“Yeah, new board and seal. Do it after this watering finishes Thursday.”
7:14am+2 sec
[AGENT NAME] asks for your yes
“I’ll log the leak and raise a job for Friday: replace board and seal at the Block 4 gate, noted as the second repair there. OK?”
7:17am+3 min
You approve
“Yep.”
7:17am+10 sec
Pump and channel watcher works on it · 2 steps
Logged the leak and raised the job
records.log_readingBlock 4 gate, leak under the boardjobs.createreplace board and seal, Block 4 gate, Friday
7:17am+3 sec
Pump and channel watcher Done
Leak logged with photo; repair job raised for Friday; gate marked as repeat repair for the infrastructure list
An example with made-up data. Names and figures in [brackets] are placeholders.
The agent behind it
Pump and channel watcherIrrigation & waterThe Pump and channel watcher keeps the water moving: pump faults, power use, off-peak runs and channel checks.
What it won’t do
- Start, stop or change a pump
- Book a contractor without asking first
- Make up a reading
More jobs the Pump and channel watcher does.
- Flag a pump drawing more power than usualDaily
- Check the pumps ran off-peak this monthScheduled
- Book pump services by run hours before the seasonScheduled
- Catch a pump running with no water movingDaily
- Walk the channels before the first watering of the seasonScheduled
- Catch a pump still running when peak power startsScheduled
Put [AGENT NAME] to work on your farm.
We’re taking a small number of pilot farms in [REGION]. Start with one or two agents and add more as you go.
See it on a farm like yours.
30 minutes with Thomas, our founder, on records like your own.
Livestock, paddocks, visitors and tanks, in one place.
The farm management software comes with every plan. Keep the software you already use, or use ours.
Not ready yet? Start with a free calculator.
The sums you do every week, for stock, pasture, crops and the books. No sign-up.
Watch a job before you commit.
Pick a playbook and see it play out, step by step.


