Catch a pump running with no water moving
A pump that’s lost its prime, sucked air or blocked its foot valve keeps running and burning power with nothing coming out. Run long enough and it cooks the seals, and the block it was meant to water gets nothing.
The Pump and channel watcher matches power draw with flow on each running pump, flags a pump that’s running dry or blocked and drafts a text to whoever’s nearest to check it.
- When · Daily
- Once pump power and flow meters are connected: a pump is drawing power but the flow meter shows little or no flow
- You get
- Which pump, its power and flow; how long it’s been like it; a text drafted for the nearest staff member, and a job
- Approval level
- Act with approval. Prepares it fully. You tap yes. You can change it.
- Useful for
- Irrigated cropsOrchards and vinesDairy
What it reads
- Power draw on each pump
- Flow meter readings
- Water level at the intake
- Who’s on and where
What you get
- A flag with the pump, power and flow
- A text drafted for the nearest staff member to check the intake
- A job logged with the times for the service record
When it stops and asks you
- The flow meter itself might be faulty
- The pump is on a remote site with nobody nearby
- The intake level is near the minimum for the licence
How often
A few times a season
Who uses it
ManagersFarm staff
What it uses
Water monitors and weather stations
Trough, tank and rain gauge readings would start jobs for the team.
SMS and voice notes
Text the team, send a voice note or a photo, or forward a message. There’s no new app to learn.
Wattwatchers
Power use on pumps and sheds would come in, so a pump that stops shows up as a job.
The last one makes it better, but it works without it.
Nothing official leaves the farm without your yes.This job runs at Act with approval: prepares it fully. You tap yes. You can change that any time.
The conversation
How the job plays out, step by step.
Pump and channel watcher
Started 5:40am · Daily
- Start to done
- 6 min
- Agent actions
- 5
- Needed you
- 2×
[AGENT NAME]For the Pump and channel watcherDaily check · 5:40am
Once the meters are connected: river pump drawing 41 kW since 1:20 am; flow meter at 3 ML/day, usual 22

Pump and channel watcher
Checked the intake level and recent faults

River pump’s been drawing near full power since 1:20 but flow is down to about a seventh of normal. River level is low at the intake. Looks like it’s sucking air or the foot valve’s blocked. Someone needs to check it and decide whether to shut it down.
[AGENT NAME] · 5:40am
I’ll send Raj. He’s up at 5.
You · 5:42am

I’ve drafted a text to Raj with the details, for you to send so it’s the first thing he sees. OK to raise a job for the intake and log the low flow?
[AGENT NAME] · 5:42am
Yep.
You · 5:45am

Pump and channel watcher
Raised the job and logged the low flow
Done · 5:45am1 waiting for you
- A flag with the pump, power and flowSaved
- A text drafted for the nearest staff member to check the intakeWaiting for you
- A job logged with the times for the service recordSaved
Behind the scenes
5:40am
Trigger Daily check
Once the meters are connected: river pump drawing 41 kW since 1:20 am; flow meter at 3 ML/day, usual 22
sensors.read_waterpower and flow
5:40am+13 sec
Pump and channel watcher works on it · 3 steps
Checked the intake level and recent faults
- River level at intake 0.3 m above minimum
- No faults this season
records.search
5:40am+2 sec
[AGENT NAME] messages you
“River pump’s been drawing near full power since 1:20 but flow is down to about a seventh of normal. River level is low at the intake. Looks like it’s sucking air or the foot valve’s blocked. Someone needs to check it and decide whether to shut it down.”
5:42am+3 min
You reply
“I’ll send Raj. He’s up at 5.”
5:42am+2 sec
[AGENT NAME] asks for your yes
“I’ve drafted a text to Raj with the details, for you to send so it’s the first thing he sees. OK to raise a job for the intake and log the low flow?”
5:45am+3 min
You approve
“Yep.”
5:45am+10 sec
Pump and channel watcher works on it · 2 steps
Raised the job and logged the low flow
jobs.createriver pump intake checkrecords.log_readingpower and flow 1:20 to 4:00 am
5:45am+3 sec
Pump and channel watcher Done
Text to Raj ready for you to send; intake check job raised; low-flow period logged against the pump for the service record
An example with made-up data. Names and figures in [brackets] are placeholders.
The agent behind it
Pump and channel watcherIrrigation & waterThe Pump and channel watcher keeps the water moving: pump faults, power use, off-peak runs and channel checks.
What it won’t do
- Start, stop or change a pump
- Book a contractor without asking first
- Make up a reading
More jobs the Pump and channel watcher does.
- Flag a pump drawing more power than usualDaily
- Check the pumps ran off-peak this monthScheduled
- Book pump services by run hours before the seasonScheduled
- Log a channel leak and raise the repair jobOn demand
- Walk the channels before the first watering of the seasonScheduled
- Catch a pump still running when peak power startsScheduled
Put [AGENT NAME] to work on your farm.
We’re taking a small number of pilot farms in [REGION]. Start with one or two agents and add more as you go.
See it on a farm like yours.
30 minutes with Thomas, our founder, on records like your own.
Livestock, paddocks, visitors and tanks, in one place.
The farm management software comes with every plan. Keep the software you already use, or use ours.
Not ready yet? Start with a free calculator.
The sums you do every week, for stock, pasture, crops and the books. No sign-up.
Watch a job before you commit.
Pick a playbook and see it play out, step by step.


