Skip to content
Agentic Ag

Track a water order when the outlet meter goes quiet

A water order is paid for by the megalitre, and your own meter is how you check the authority’s figure. A meter that drops out overnight halfway through an order leaves megalitres you can’t account for when the bill comes.

The Pump and channel watcher checks whether water is still moving by the storage the outlet fills, says the meter is offline rather than taking its last figure, gets a hand reading off the totaliser and logs it after your yes so the order’s megalitres aren’t lost.

When · Daily
The Outlet 4 flow meter has had no reading for 6 hours while a 100 ML water order is running through it
You get
The meter called offline; whether water is still moving; a hand reading logged with the ML since the last one; a battery job on the list
Approval level
Act with approval. Prepares it fully. You tap yes. You can change it.
Useful for
Irrigated cropsDairy

What it reads

  • Monitoring: Outlet 4 flow meter, last reading 4:00 am, battery 12%
  • Monitoring: the turkey’s nest Outlet 4 fills, still reporting
  • Water order [number]: 100 ML over four days, from [date]
  • Hand readings typed in on Outlet 4 before

What you get

  • A plain flag that the Outlet 4 meter is offline
  • Whether water is still moving, from the storage it fills
  • The totaliser reading logged by hand, with the megalitres since the last reading
  • A job to change the meter’s battery

When it stops and asks you

  • The storage has stopped rising too, so the water may have stopped
  • The hand reading is well off what the order should have delivered by now
  • Nobody can get to the outlet today

How often

A few times a season

Who uses it

ManagersFarm staff

What it uses

Partner

Water monitors and weather stations

Trough, tank and rain gauge readings would start jobs for the team.

Live

SMS and voice notes

Text the team, send a voice note or a photo, or forward a message. There’s no new app to learn.

The last one makes it better, but it works without it.

Nothing official leaves the farm without your yes.This job runs at Act with approval: prepares it fully. You tap yes. You can change that any time.

See the guardrails

The conversation

How the job plays out, step by step.

Pump and channel watcher

Started 5:40am · Daily

Start to done
8 min
Agent actions
5
Needed you
2×
[AGENT NAME]For the Pump and channel watcher

Daily check · 5:40am

Outlet 4 flow meter: no reading for 6 hours, partway through a water order

Pump and channel watcher

Checked whether water is still moving

Outlet 4’s meter went quiet at 4 am. The turkey’s nest is still rising, so the water’s still coming and it’s the meter. Its battery was at 12%. Can someone read the totaliser so we don’t lose the order’s count?

[AGENT NAME] · 5:40am

Totaliser says 1,810.5.

Staff · 5:45am

That’s 6.3 ML since 4 am, about right for the order. Log 1,810.5 ML on Outlet 4 as a hand reading, and a job to change its battery today?

[AGENT NAME] · 5:45am

Approved

Yep.

You · 5:47am

Pump and channel watcher

Logged the reading and added the job

Done · 5:48am4 saved

  • A plain flag that the Outlet 4 meter is offlineSaved
  • Whether water is still moving, from the storage it fillsSaved
  • The totaliser reading logged by hand, with the megalitres since the last readingSaved
  • A job to change the meter’s batterySaved

Behind the scenes

  1. 5:40am

    Trigger Daily check

    Outlet 4 flow meter: no reading for 6 hours, partway through a water order

    • Monitoring: Needs a look, Outlet 4
  2. 5:40am+13 sec

    Pump and channel watcher works on it · 3 steps

    Checked whether water is still moving

    • sensors.read_waterOutlet 4 last reading 4:00 am, 1,804.2 ML on the totaliser, battery 12%
    • Turkey’s nest: up 9 cm since 4 am, still rising
    • Water order [number]: 100 ML from [date], about 58 ML through by 4 am
  3. 5:40am+2 sec

    [AGENT NAME] messages you

    “Outlet 4’s meter went quiet at 4 am. The turkey’s nest is still rising, so the water’s still coming and it’s the meter. Its battery was at 12%. Can someone read the totaliser so we don’t lose the order’s count?”

  4. 5:45am+5 min

    Staff replies

    “Totaliser says 1,810.5.”

  5. 5:45am+2 sec

    [AGENT NAME] asks for your yes

    “That’s 6.3 ML since 4 am, about right for the order. Log 1,810.5 ML on Outlet 4 as a hand reading, and a job to change its battery today?”

  6. 5:47am+3 min

    You approve

    “Yep.”

  7. 5:47am+10 sec

    Pump and channel watcher works on it · 2 steps

    Logged the reading and added the job

    • records.log_readingOutlet 4, 1,810.5 ML, by hand, [staff], 10:05 am
    • jobs.createReplace the battery in the Outlet 4 flow meter, today, [staff]
  8. 5:48am+3 sec

    Pump and channel watcher Done

    Outlet 4’s count kept through the gap with the hand reading; about 64 ML of the 100 ML order accounted for; battery job on the list; the meter shows offline until it reports again

An example with made-up data. Names and figures in [brackets] are placeholders.

The farm software this job works from

Put [AGENT NAME] to work on your farm.

We’re taking a small number of pilot farms in [REGION]. Start with one or two agents and add more as you go.

Pilot farms wanted

Want to try it out?

Join the pilot, or book a demo and we’ll walk you through this job on a farm like yours. You text the team from your phone. Some connections are still being built, and we’ll tell you which.

  • Water monitors and weather stations
  • SMS and voice notes
  • Nothing to install

Free report

Getting started with AI.

A free practical guide for Australian farms and agribusinesses

Where AI actually helps on a farm, what it needs from you, the risks to watch, and a 90-day plan to start small.

  • Where it actually helps
  • What it needs from you
  • Risks and guardrails
  • Working out the return
Book a demoJoin the pilot