Sum up each pump’s season from the flow meters before winter
Winter is when pumps can be pulled and fixed, but by June nobody remembers which one was losing flow in February or which meter kept dropping out. The repairs get left until the first order of next season.
The Pump and channel watcher adds up each pump’s season from its flow meter, from megalitres moved and days run to how its flow held up, puts the alarms and services beside it and puts the winter repairs on the list after your yes.
- When · Scheduled
- A week after the last water order of the season closes
- You get
- A season summary for each pump; pumps that lost flow; meters that kept dropping out; winter repair jobs on the list
- Approval level
- Act with approval. Prepares it fully. You tap yes. You can change it.
- Useful for
- Irrigated cropsOrchards and vinesDairy
What it reads
- Monitoring: 12 months of readings on each pump’s flow meter
- Alarm history on each pump’s meter
- Machinery services on each pump this season
- Hand readings typed in during gaps
What you get
- Megalitres moved, days run and average flow for each pump
- Flow at the start and end of the season, and which pumps lost it
- Meters with repeat offline or battery alarms
- Winter repair and service jobs, after your yes
When it stops and asks you
- A pump’s meter was offline for long stretches, so its total is short
- A pump changed blocks partway through the season
- A repair was done that wasn’t logged
How often
Once a year, at the end of the irrigation season
Who uses it
OwnersManagers
Nothing official leaves the farm without your yes.This job runs at Act with approval: prepares it fully. You tap yes. You can change that any time.
The conversation
How the job plays out, step by step.
Pump and channel watcher
Started 6:00am · Scheduled
- Start to done
- 6 min
- Agent actions
- 7
- Needed you
- 2×
[AGENT NAME]For the Pump and channel watcherOn schedule · 6:00am
The last water order of the season closed a week ago

Pump and channel watcher
Added up each pump’s season from its flow meter

Season’s done. The river pump moved 642 ML and held its flow after the impeller in [month]. Pump 2 moved 388 ML but dropped from 70 to 61 L/s over the season, about 13%, with no service logged. Pump 3 was steady. The Outlet 4 meter dropped out 5 times.
[AGENT NAME] · 6:00am
Pump 2 wants pulling then. And get a better battery on that meter.
You · 6:02am

I’ll add two winter jobs: pull Pump 2 and check the impeller and suction with [mechanic] before [month], and fit a new battery pack to the Outlet 4 meter. OK?
[AGENT NAME] · 6:02am
Yes.
You · 6:05am

Pump and channel watcher
Added the jobs and filed the summary
Done · 6:05am1 waiting for you
- Megalitres moved, days run and average flow for each pumpSaved
- Flow at the start and end of the season, and which pumps lost itSaved
- Meters with repeat offline or battery alarmsSaved
- Winter repair and service jobs, after your yesWaiting for you
Behind the scenes
6:00am
Trigger On schedule
The last water order of the season closed a week ago
records.searchlast order [number], closed [date]
6:00am+16 sec
Pump and channel watcher works on it · 4 steps
Added up each pump’s season from its flow meter
sensors.read_waterriver pump 642 ML over 118 days, back to 90 L/s after the impeller in [month]- Pump 2: 388 ML over 96 days, 70 L/s at the start, 61 L/s at the end
- Pump 3: 214 ML over 71 days, steady
- Outlet 4 meter: offline 5 times, battery alarms 3 times
6:00am+2 sec
[AGENT NAME] messages you
“Season’s done. The river pump moved 642 ML and held its flow after the impeller in [month]. Pump 2 moved 388 ML but dropped from 70 to 61 L/s over the season, about 13%, with no service logged. Pump 3 was steady. The Outlet 4 meter dropped out 5 times.”
6:02am+3 min
You reply
“Pump 2 wants pulling then. And get a better battery on that meter.”
6:02am+2 sec
[AGENT NAME] asks for your yes
“I’ll add two winter jobs: pull Pump 2 and check the impeller and suction with [mechanic] before [month], and fit a new battery pack to the Outlet 4 meter. OK?”
6:05am+3 min
You approve
“Yes.”
6:05am+13 sec
Pump and channel watcher works on it · 3 steps
Added the jobs and filed the summary
jobs.createPull Pump 2, check impeller and suction, [mechanic], before [month]jobs.createNew battery pack, Outlet 4 flow meter, [staff]reports.draftPump season summary, [year]
6:05am+3 sec
Pump and channel watcher Done
Season summary filed for 3 pumps and the outlet meter; Pump 2 and the Outlet 4 meter on the winter job list
An example with made-up data. Names and figures in [brackets] are placeholders.
The agent behind it
Pump and channel watcherIrrigation & waterThe Pump and channel watcher keeps the water moving: pump faults, power use, off-peak runs and channel checks.
What it won’t do
- Start, stop or change a pump
- Book a contractor without asking first
- Make up a reading
More jobs the Pump and channel watcher does.
- Flag a pump drawing more power than usualDaily
- Check the pumps ran off-peak this monthScheduled
- Book pump services by run hours before the seasonScheduled
- Log a channel leak and raise the repair jobOn demand
- Catch a pump running with no water movingDaily
- Walk the channels before the first watering of the seasonScheduled
The farm software this job works from
Put [AGENT NAME] to work on your farm.
We’re taking a small number of pilot farms in Australia. Start with one or two agents and add more as you go.
See it on a farm like yours.
30 minutes with Thomas, our founder, on records like your own.
Livestock, paddocks, visitors and tanks, in one place.
The farm management software comes with every plan. Keep the software you already use, or use ours.
Not ready yet? Start with a free calculator.
The sums you do every week, for stock, pasture, crops and the books. No sign-up.
Watch a job before you commit.
Pick a playbook and see it play out, step by step.


