Skip to content
Agentic Ag

Calculators & toolsWater and irrigation

Irrigation depth and volume calculator

Convert between megalitres, millimetres over an area and pumping time. Add the water price to see the cost.

Work out

From the meter or the pump curve.

Water needed

10 ML

50 mm over 20 ha

Pumping time
92.6 hours
about 3.9 days at 30 L/s

Rather not work this out each time?The team can keep track of it for you, from your own records.

See it in a demo

General guidance only. The answer is an estimate from the figures you enter, so check it against your own records and advice.

How it’s worked out

  • 1 ML over 1 ha is 100 mm deep. So depth (mm) = ML ÷ ha × 100, and ML = mm × ha ÷ 100.
  • ML pumped = flow (L/s) × 3,600 × hours ÷ 1,000,000. Hours = ML × 1,000,000 ÷ (L/s × 3,600).
  • This is the water delivered. Losses to evaporation, runoff and deep drainage mean the crop gets less, so allow for your system’s efficiency.

Where to next

Three ways to see if it suits your farm.

Start with whichever feels right.

Or book a 30-minute demo
  1. 1Read

    Get the free report

    Getting started with AI. Where AI earns its keep on a farm, and a 90-day plan to start small.

  2. 2Watch

    See a job, step by step

    Pick a job from the library and see what sets it off, who does it and what you end up with.

  3. 3Try

    Put it on your own records

    We’re taking a small number of pilot farms in [REGION]. Start with one or two agents.

Book a demoJoin the pilot