Skip to content
Agentic Ag

Calculators & toolsWater and irrigation

Tank and dam volume calculator

Enter the size of a round tank, a rectangular tank or trough, or a dam. Get the capacity in litres and megalitres.

Shape

Capacity

23,091 L

3.5 m across and 2.4 m high

Litres per cm of depth
96 L
Megalitres
0.023 ML

Rather not work this out each time?The team can keep track of it for you, from your own records.

See it in a demo

General guidance only. The answer is an estimate from the figures you enter, so check it against your own records and advice.

How it’s worked out

  • Round tank = π × (diameter ÷ 2)² × height. Rectangular = length × width × height. 1 m³ is 1,000 L and 1 ML is 1,000,000 L.
  • Litres per cm = the floor area in m² × 10, handy for reading a tank with a dipstick.
  • Dam ≈ top length × top width × depth × shape factor. Sloped sides and a rounded floor hold much less than a box, so 0.4 is a common rule of thumb. A survey gives the true figure.

Where to next

Three ways to see if it suits your farm.

Start with whichever feels right.

Or book a 30-minute demo
  1. 1Read

    Get the free report

    Getting started with AI. Where AI earns its keep on a farm, and a 90-day plan to start small.

  2. 2Watch

    See a job, step by step

    Pick a job from the library and see what sets it off, who does it and what you end up with.

  3. 3Try

    Put it on your own records

    We’re taking a small number of pilot farms in [REGION]. Start with one or two agents.

Book a demoJoin the pilot