Skip to content
Agentic Ag

Calculators & toolsWater and irrigation

Pump energy cost calculator

Enter the flow, total head (how hard the pump has to push, in metres) and hours. Get the power the pump draws, the energy used, and what it costs per megalitre on electricity or diesel.

Power source

Lift plus pipe friction plus outlet pressure (10 m per 100 kPa).

Often 60–75% in the field. Check the pump curve.

Cost to pump

$60.37

1.08 ML at 30 L/s for 10 hours against 40 m

Per ML
$55.90
Power drawn
20.1 kW
11.8 kW into the water
Energy
201 kWh

Rather not work this out each time?The team can keep track of it for you, from your own records.

See it in a demo

General guidance only. The answer is an estimate from the figures you enter, so check it against your own records and advice.

How it’s worked out

  • Water power (kW) = 9.81 × flow (m³/s) × total head (m). 1 L/s is 0.001 m³/s.
  • Electric: power drawn = water power ÷ (pump efficiency × motor efficiency). Cost = kW × hours × $/kWh.
  • Diesel: litres = water power ÷ pump efficiency × hours × L per kWh. Cost = litres × $/L.
  • Cost per ML = cost ÷ ML pumped. A worn pump or a choked foot valve can add a lot, so test efficiency every few years.

Where to next

Three ways to see if it suits your farm.

Start with whichever feels right.

Or book a 30-minute demo
  1. 1Read

    Get the free report

    Getting started with AI. Where AI earns its keep on a farm, and a 90-day plan to start small.

  2. 2Watch

    See a job, step by step

    Pick a job from the library and see what sets it off, who does it and what you end up with.

  3. 3Try

    Put it on your own records

    We’re taking a small number of pilot farms in [REGION]. Start with one or two agents.

Book a demoJoin the pilot