Skip to content
Agentic Ag

Calculators & toolsWater and irrigation

Rainwater harvest calculator

Enter a roof or catchment area and the rainfall. Get the water captured and how much of your tank or dam it fills.

Catchment

One fall, or the total for a month or a year.

The plan area under the gutters.

Often 80–90% for a metal roof.

Water captured

8,500 L

25 mm on 400 m² at 85% capture

Per mm of rain
340 L
Of the tank
17%
of an empty 50,000 L tank

Rather not work this out each time?The team can keep track of it for you, from your own records.

See it in a demo

General guidance only. The answer is an estimate from the figures you enter, so check it against your own records and advice.

How it’s worked out

  • Roof: litres = roof area (m²) × rainfall (mm) × capture %. 1 mm of rain on 1 m² is 1 L.
  • Dam: ML = catchment (ha) × rainfall (mm) ÷ 100 × runoff %. 1 mm on 1 ha is 10,000 L.
  • First-flush diverters, small falls that just wet the roof and dry soils that soak up rain all cut the water captured.

Where to next

Three ways to see if it suits your farm.

Start with whichever feels right.

Or book a 30-minute demo
  1. 1Read

    Get the free report

    Getting started with AI. Where AI earns its keep on a farm, and a 90-day plan to start small.

  2. 2Watch

    See a job, step by step

    Pick a job from the library and see what sets it off, who does it and what you end up with.

  3. 3Try

    Put it on your own records

    We’re taking a small number of pilot farms in [REGION]. Start with one or two agents.

Book a demoJoin the pilot